IP address for element electronics model No:ELDFW374

Hi
It will only have an IP address if it is connected to a network and has been allocated one whether static or dynamic.
Cheers

the tv picks up an available IP address automatically from a router.
it is not fixed or assigned by user.

There are plenty of free operation manual downloads. Please search in Google.

I hope thisis understandable.

1. Switch printer off
2. Whilst pressing the [FEED] and [PAUSE] keys, switch the printer on. Display shows D I A G . V 3 . 1
3. Press [FEED] button 6 TIMES or until the display shows I P A D D R E S S
4. Press [PAUSE]
5. Press [PAUSE]. Display shows IP Address
6. Using the [FEED] and [RESTART] buttons, change the 1st number in the IP address
7. When you have reached the number you want, press [PAUSE] to step to the 2nd number in the IP address.
8. Again Using the [FEED] and [RESTART] buttons, change the 2nd number in the IP address
9. Again when you have reached the number you want, press [PAUSE] to step to the 3rd number in the IP address.
10. Repeat steps 8 and 9 until you have the 4 digits you want in the IP address.
11. After the 4th number has been entered and you press [PAUSE] you can change the GATEWAY IP ADDRESS.
12. Step through the above sequences to get the GATEWAY IP ADDRESS you want.
13. You'll then move onto the SUBNET MASK IP ADDRESS. Same steps as before.
14. The next and final item is the SOCKET PORT, enter this 5 digit number as above, stepping through each of the 5 elements that make up the 5 digit number.

I hope thisis understandable.

1. Switch printer off
2. Whilst pressing the [FEED] and [PAUSE] keys, switch the printer on. Display shows D I A G . V 3 . 1
3. Press [FEED] button 6 TIMES or until the display shows I P A D D R E S S
4. Press [PAUSE]
5. Press [PAUSE]. Display shows IP Address
6. Using the [FEED] and [RESTART] buttons, change the 1st number in the IP address
7. When you have reached the number you want, press [PAUSE] to step to the 2nd number in the IP address.
8. Again Using the [FEED] and [RESTART] buttons, change the 2nd number in the IP address
9. Again when you have reached the number you want, press [PAUSE] to step to the 3rd number in the IP address.
10. Repeat steps 8 and 9 until you have the 4 digits you want in the IP address.
11. After the 4th number has been entered and you press [PAUSE] you can change the GATEWAY IP ADDRESS.
12. Step through the above sequences to get the GATEWAY IP ADDRESS you want.
13. You'll then move onto the SUBNET MASK IP ADDRESS. Same steps as before.
14. The next and final item is the SOCKET PORT, enter this 5 digit number as above, stepping through each of the 5 elements that make up the 5 digit number.

go to menu --> settings --> network configuration --> server menu and scroll down to server address and give the server ip address and save the settings and reboot

definately you will need to change the IP address.
But you can also change the IP address of the wireless extender.
so instead of changing the IP address of the router, you can change the IP address of the extender.
For that you will need to connect the computer to the Extender.
assign a static IP to the computer 192.168.0.10 and Default gateway 192.168.0.30. that will open the set up page of the extender.
change the IP addres of the extender to 192.168.1.30.
that will help you.
For more info about networking click Here

Which model are you talking about ? I have included both


Here is the OSI model
Layer 1 = physical medium & signal on the wire (physical)
Layer 2 = MAC Address and SNAP (ATM) (data link)
Layer 3 = IP Addressing V4 V6 (network)
Layer 4 = TCP/UDP (RTP, RTSP) (transport)
Layer 5 = Duplexing Half or full (Session)
Layer 6 = HTTP, FTP, SNMP (presentation)
Layer 7 = Web browser, FTP Client, (application)

TCP Model:
Layer 1 = physical medium & signal on the wire (physical) (Hub and reapeter)

Layer 2 = MAC Address and SNAP (ATM) (data) (Switches and bridges)

Layer 3 = IP Addressing V4 V6,
Layer 4 = TCP/UDP (RTP, RTSP) (Internetwork) (Firewall, IPSEC) Routers

(This function is split between 4&5) Duplexing Half or full

Layer 5 = , HTTP, FTP, SNMP, Web browser, FTP Client, (application) (programs)


I hope this helps,

Thank you,

Shuttle83

http://www.electron-age-technologies-llc.com

An IP address or internet protocol address is a unique address that certain electronic devices use in order to identify and communicate with each other on a computer network utilizing the internet protocol standard (IP) n simpler terms, a computer address

is given by your provider (Who provides the Internet connection)
I recommend voting ;)

An IP address (Internet Protocol address) is a unique address that certain electronic devices use in order to identify and communicate with each other on a computer network utilizing the Internet Protocol standard (IP)—in simpler terms, a computer address.