Question about Kyocera Office Equipment & Supplies
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Kyocera KM 3050 - error C3300
Error C3300 is a CCD Automatic Gain Control issue.
It could be poor contact in the connector terminals from the SHD PWB to the CCD PWB.
It is more likely a defective exposure lamp or inverter board that powers the lamp.
Try lifting up the Document feeder so you can see the optics frame through the platen glass and turning off and then on, the main power switch to see if the green exposure lamp illuminates.
A better, but more complicated way to check the lamp is to enter the service mode and run the exposure lamp test simulation. I will outline this procedure below. BE SURE NOT TO MESS WITH OTHER THINGS IN SERVICE MODE OR YOU COULD RENDER YOUR UNIT COMPLETELY UNUSABLE.
To Enter Service Mode:
Hit the "Status" button
Hit the following sequence on the numerical keypad:
1 0 8 7 1 0 8 7
You should be in service mode.
Use U601 by typing 6 0 1 and then "Start"
U601: Turning the exposure lamps on
Description: Turns the exposure lamp on.
Purpose: To check the exposure lamp.
CCD: Main Exposure Lamp
CID: Document Processor Exposure Lamp (inside the feeder)
1. Press the start key.
2. Select the item.
3. Press the start key. The selected lamp lights.
4. To turn the exposure lamp off, press the stop key.
Press the stop key. The screen for selecting a maintenance item No. is displayed.
After checking the lamp(s) operation hit "reset" a few times to back out where you can type 0 0 1 "Start" to Exit Service Mode.
Posted on Jun 03, 2008
Go to Xerox.com. Click on the Support and driver section.
Type in 123 in the search box. Then when it comes up, select Drivers and Downloads, then on that site you can click on Documentation and download the User and Admin Guides. That way you can have that info at your fingertip.
The default code is 1111, or 11111. 4 or 5 ones.
Posted on May 04, 2009
Tips for a great answer:
Dec 09, 2013 | Samsung Galaxy Y DUOS Android Smartphone
Dec 09, 2013 | Samsung S3650 Corby / S3650 Genio Touch...
Dec 09, 2013 | Samsung Glyde SCH-u940 Cellular Phone
Dec 08, 2013 | Samsung Galaxy S GTI9000 Smartphone
Dec 06, 2013 | Samsung C3300 Champ Touch Camera Slim...
Dec 06, 2013 | Samsung Galaxy GT-S5570
Dec 06, 2013 | Samsung GT S3850 Corby II
Nov 30, 2013 | Samsung i9500 Galaxy S4 16GB Unlocked...
Dec 26, 2010 | Computers & Internet
Nov 27, 2009 | Office Equipment & Supplies
121 people viewed this question
Usually answered in minutes!