Question about Televison & Video

1 Answer

I have a 32 inch lg550, it stays on for about 10 seconds then shuts off. Is there an reset code with it that would stop it from doing that

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,698 Answers

Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Nov 10, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 58 inch Sanyo flat screen TV, I turn it on everything works fine, shuts down in about 10 minutes! Sound stays on though. If I shut it off and turn it back on it does the same thing!


Easiest TV repair - How to Fix Power [TV turns off, freezes ...

? 6:44
https://www.youtube.com/watch?v=OKklZpTGBGU
Apr 27, 2014 - Uploaded by Keith Fox
I demonstrate in this video how to repair a Sanyo by swap out the... the Sanyo DP47460 that I'm having an issue with. after ~ 40minutes of watching, if I attempt to change the channel or adjust the volume, the picture/screen freezes. ... After ~ 20 seconds, theTV will automatically shut off, then turn back on.

SAMSUNG TV REPAIR- TURNS OFF RANDOMLY - YouTube

? 9:24
https://www.youtube.com/watch?v=7Rj22VNhKXg
Jun 25, 2012 - Uploaded by Tampatec
EASY HOW TO FIX SAMSUNG TV- TURNS OFF RANDOMLY Clicking ... Hi, I've got a Samsung LED TV that switches off after20 seconds and remains off. .... after about couple of minutes, is this the same problem with the tv in the video? .... 10:32. How to repair a Samsung LCD TV with a flashing standby ...

TV Turns On, Backlight Inverter Immediately Turns Off TV ..





Dec 17, 2015 | Televison & Video

1 Answer

VIORE 32"LCD lc32vh70 Has sound but the screen turned in black


Does it turn black after about 10-15 seconds? My 40" Viore had the same problem. After trial and error, I finally fixed the problem. There is a motherboard with a cable wire coming from one end to another motherboard. 3 wires. If you remove this wire and kind of jiggle it it in, barely touching the contact points, you will see the image stay on longer than 15 seconds. You have to cut one of the wires on the board with all the inputs, VGA, HDMI, power cord, etc. I have taken pics but have not taken them out of the camera yet. If interested, post back here and I'll (hopefully) get them out. But a word of caution: my 40" inch TV motherboard may be different than your 32" inch.

Feb 08, 2014 | Televison & Video

1 Answer

Tablet xhut off when on it


samsung galaxy 10 2.1 keeps rebooting and rebooting automatically. Displays going into power saving mode and reboots. stays on for aobut 10 seconds and then shuts down. Will not take a hard reboot. Help

Oct 29, 2013 | Samsung Galaxy 10 inch Tablet Wifi...

1 Answer

How do i program my rca remote to my 42 inch samsaung tv


you can try a code search


  1. Turn on the tv you want to program.
  2. Press and hold both the button for the component along with the power button until the light comes on and stays on.
  3. Press the play button every 5 seconds until the device turns off. A bank of ten codes is being sent each time.
  4. Press the rewind/reverse button to see if it turns off/on again. Wait 2 seconds and press again until it turns back on. You may have to do this up to 10 times until it searches through the bank of ten codes sent.
  5. Press and hold the stop button until the light goes off. This saves the code.

Mar 03, 2011 | RCA 3-Device Universal Remote

1 Answer

The lamp went out in my TV. I replaced the lamp and it worked fine. I moved the TV and when I went to turn it on it wouldn't stay on. It will come on for about 10 seconds and then shut back off. The red...


Recheck all the projection lamp conections again.Still getting,the same result.Replace the projection lamp again,some how the move,it got the projection lamp shorted.

Oct 03, 2010 | Mitsubishi WD-60735 Projection Television

1 Answer

I have on Sony KDF55E2000. 55 inch projection. Power wont stay on


Hi,
It is clear symptom that lamp is near to end of its wroking life and tv needs lamp replacement.
Please replace lamp in tv to get it back in business. Lamp replacement procedure would be written in user manual and its easy.
Please buy Sony original lamp for good picture.
Let me know if you have additional question.
Thanks.

Apr 17, 2010 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Mitsubishi 55 inch-ws 55511


23 code means "loss of Horizontal Deflection"

Nov 14, 2008 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Hayward Heat Pro Electric won't stay running


from the Hayward support site....

Why is my pump cutting off and on every 5-10 seconds?
  • Hayward motors are factory wired for 240 volts unless the motor is 120 volts ONLY. Check the voltage of the incoming supply power and ensure the motor is wired or can be wired for this voltage (data plate on motor will help provide voltage and wiring information). Also check for loose or badly connected wires. Contact a certified electrician for repair.

Sep 24, 2008 | Hayward Heatpro 100,000 Digi. Thermostat...

3 Answers

Screen retracts, then opens, and retracts, and does not stop


I had that problem too I'll I did was press the reset butoon on my unit and everything resetted but the bypass code, you have to reprogram your stations and the time thats it

Mar 20, 2008 | Jensen's VM9312 Car DVD Player

1 Answer

Tv turns on but wont stay on


There is a resistor on the CRT board that goes bad sometimes. I cannot remember the number but it is a common fault as the TV starts up and then detects too much beam current and shuts back down. If you have a multimeter, you can check the resistors if you know how the color coding works on these resistors. If you do not, take the set to a repair shop, as this problem, if this is the problem, should not cost that much to replace a 10 cent resistor. Good Luck

Jun 12, 2007 | Philips 32PT6441/37 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

Cindy Wells

Level 3 Expert

5060 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...