Question about Kirby G10 Sentria Vacuum Cleaner Refurbished

1 Answer

Jerry Goss Nov 09, 2014 03:15PM EST Transmisson only engarges and works when pulling bacwkards. Will not work pushing forward. Please, would you give some suggestion on how to fix. Have disassembl

Jerry Goss Nov 09, 2014 03:15PM EST Transmisson only engarges and works when pulling bacwkards. Will not work pushing forward. Please, would you give some suggestion on how to fix. Have disassembled to point where belt comes off and drop out the bottom. Please Help! Jerry Goss , You will have a new customer if you can help.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 243 Answers

The transmission is shifted when the handle is pushed or pulled. This may come out of adjustment or be worn. It is also important to have a good belt on the brush roll as this aids in moving forward. The third problem may be worn wheels which also are necessary to make it drive properly. You need hands on to fix this. Take it to an expert in your area.

Posted on Nov 09, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Buffalo12980
  • 625 Answers

SOURCE: G2000 Kirby HELP

I'm not familiar with this type of vacuum, but if it's like most kirby's the powerhead gets all its motion off the tapered spindle underneath the powerhead. IF the belt is installed backwards on this spindle then all motions are reversed. there should be an arrow stamped into the blower housing. the belt should be installed so it is nearest to the arrow in the direction of the arrow on the housing.

Posted on Aug 24, 2007

  • 4 Answers

SOURCE: sweeper vibrates when pushed forward.

do u put it on drive or neutral? does the wheels spin when on drive? is the height adjuster on the right level?

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why am I unable to push vacuum forward on new area rug. But will work pulling backward. Works fine on old rugs and floor


It might be that the new rug has a backing that is not as stiff a the other rugs which can cause a rug to bunch up making it hard to push the vacuum forward.

Feb 23, 2015 | Dyson DC25 Animal Upright Ball Bagless...

1 Answer

Have dyson 17 and will not **** up dirt cleaned filter and unit but will not **** up with wand or head pushing dirt out not sucking in


Hi Jerry,

I am sorry to hear you are having difficulty with your DC17. Based on the details you provided we may be able to resolve this problem over the phone. Please call us at 1-866-693-9766 (US) or 0800 298 0298 (UK). We look forward to speaking with you.

Best wishes,

Jessica

Jul 01, 2012 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

Bissell Power Steamer Pro Deluxe will not move forward


tip unit back to lift brushes off floor and roll forward until over carpet edge. tip back unit to sit flush on carpet and unlock handle so it swings freely. now pull backwards ith finger on spray trigger. that's how it works, not by pushing forwad.

May 16, 2010 | Bissell 1698 PowerSteamer ProHeat Upright...

1 Answer

Power nozzle works intermittently


The pin connection from the lower handle tube to the power nozzle are not making good contact. It is new, so i would have warranty service performed.

Nov 19, 2009 | Vacuums

1 Answer

Cannot push forward


sounds like tear down to me to find out whats jamed in the whells ore the belt there not much to fix there things

Jul 23, 2009 | Bissell Lift-Off(R) Revolution(R) Turbo...

1 Answer

Hoover model F8515 won' t **** up any water


http://geeksquad.fixya.com/ThreadView.aspx?prdid=618767&thid=703954
Hoover Model F8515 won' t **** up any water
posted by kevingao92 on Jun 24, 2008
It could be in reverse do you have any tips

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. the Hoover Model # F8515 works on the pull back to pickup the water and on the push forward you can dispense extra water or solution and the brushes will still scrub but on the pull back it dispenses, scrubs and also picks up the water all in one sweep, if not then contact you local vacuum dealer in your area, check the owner’s manual for the trouble shooting guide and or call the Hoover Factory cust serv @ the information listed below.

So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.


Jun 24, 2008 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Handle unit came off


http://geeksquad.fixya.com/ThreadView.aspx?prdid=49977&thid=623558
Handle unit came off
Posted by Mcnarymoss on May 26, 2008
Hi. My unit was working fine. Then my wife started using it. She was going back and forth using the Power Drive feature. Now, the entire handle slips off, and the unit is not working correctly at all. Any ideas

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The Bissell 1698 Power Steamer ProHeat Upright has a – let’s call it a power drive rod that has come apart and is no longer working and needs to be re-connected. The best results of the power steamer is that the power steamer works better on the pull back, which means that you dispense the water, the brushes scrub the carpet and the vacuum picks up the water and it goes into the recovery tank – if you go forward use the trigger assm to dispense the water so I t get a chance to soak in but the best results are on the pull back. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.bissell.com/ Customer Service 1-800-237-7691
Hours of Operation Monday thru Friday 8:00 am to 10:00 pm EST
Saturday 9:00 am to 8:00 pm EST
Mail To: Headquarters, Bissell Homecare Inc
P.O. Box 3606 Grand Rapids. MI 49501
http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man


May 26, 2008 | Bissell 1698 PowerSteamer ProHeat Upright...

Not finding what you are looking for?
Kirby G10 Sentria Vacuum Cleaner Refurbished Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

JoeVacs

Level 2 Expert

357 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...