Question about Food Processors

1 Answer

Hi, this may seem like a daft question but, after assembling the food processor according to the manual we can not get it to switch on, there is clearly power going to the machine as the speed dial is

Hi, this may seem like a daft question but, after assembling the food processor according to the manual we can not get it to switch on, there is clearly power going to the machine as the speed dial is lit up with a blue light, we've tried turning the dial and nothing happens, are we being really silly or does this mean the product is broke?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 179 Answers

If you recently purchased it and it does not work out of the box, take it back and exchange it. Not worth looking into as a repair.

Posted on Nov 09, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: cuisinart food processor

I went through the same thing...as it turns out, everything was locked into place but I had the handle in the back rather than the front where the sensor is. Good luck. I hope that helps you.

Posted on Feb 06, 2008

  • 1 Answer

SOURCE: I got an old hamilton

I just bought this same model for a habitat for humanity store. You can call Hamilton Beach directly at 1-800-851-8900 and they will order you a manual. The cost is $3.50. I went on their website at hamiltonbeach.com under products, kitchen appliances and use and care. However, just this model is so old the manual was no longer availabe for download.

Posted on Jun 19, 2008

SOURCE: Manual for Bravetti food processor/ blender model EP 199

I have a manual for the Bravetti Food Processor Model EP 199 that I am just getting ready to put up for sale on Ebay. I can copy the pages of the manual and send them in a email to you if you would like. Just email me at geh422@aol.com and I can send it to you!


Gail

Posted on Oct 27, 2008

  • 1 Answer

SOURCE: Cuisinart Prep 11 Plus Food Processor - Help!

Not sure if you found the solution by now but we recently had a similar issue. Make sure the bowl is put on such that the handle is facing the front of the processor. There is a little black button that gets depressed when the lid gets put on. We had to get the thing to work one night and spent hours trying to get the processor on and then trying to get a blender to work before finding the problem.

Hope this helps.

Posted on Nov 28, 2008

  • 1170 Answers

SOURCE: Need Manual for Moulinex La Machine Food Processor

You can download the manual fro the following link.

http://www.moulinex.com/services/product-manuals/download-manuals.htm.

Please rate me if my solution proves useful.
Regards
arjun

Posted on May 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to download manual for mini food processor 100 and can't seem to do it..


Hi,

You can download and print the instruction manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Thanks for using FixYa.

Aug 23, 2010 | Black & Decker MFP100 MiniPro Food...

1 Answer

I have a small Cuisinart food processor and I cannot figure out how to turn it on. It has two levers low and high. I have it plugged in and the lid on? Please help. Fiona Slattery 858-752-8591


Hi,

Your PowerBlend Duet™ comes with a food processor button. This button is the perfect speed for all your food processing tasks. Always use this speed when using the food processor. You may also use the Pulse button with this function for pulse-chopping.
To use your food processor, make sure that the bowl is assembled properly and the blade or slicing/shredding disc and the cover are locked into place.
When you use the control panel, the LED will light next to each button you press.
Press the On button. For continuous operation, press the Food Processor button. Motor will start if you have followed assembly instructions.
To turn motor off, press the Food Processor button again or the Off button.
For on/off operation, called pulse-chopping or pulsing, press the On button, press the Pulse button, and then press and release the
Food Processor button the desired number of times. Motor runs as long as you hold the Food Processor button down. The motor stops when you release control switch. Try it a few times.
You control the duration and frequency of pulses by the length of time you hold the Food Processor button down and the rate at which you press it. Pulses should be short bursts. Allow enough time between pulses to let food in work bowl fall to bottom.
Always use the Food Processor button for pulse/chopping. Never turn cover back and forth to start and stop processor.

You can download manual from the below link

http://www.cuisinart.com/share/pdf/manuals/bfp-10ch.pdf

ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Sep 12, 2009 | Cuisinart Food Processors

1 Answer

Motor switch not activating on a dfp-14ts


Is the cover assembly engaged and locked into place? If you can't lock the cover into place, it's possible that part of the plastic on the cover assembly is broken and not engaging the white rod inside the bowl. Determine which part is at fault (either the bowl or the cover assembly) and replace it.

Dec 19, 2008 | Cuisinart DFP-14BC Custom Food Processor

1 Answer

Need a instruction book or manual for cuisinart 7 cup food proces


All manuals for models made in last few years are on Cuisinart website.

Removing a Cuisinart Food Processor Work Bowl
You have to remove the pusher first by twisting it off. Then press the sides of the pusher sleeve inward and slide the sleeve up and out of place. Then twist off the lid - all twisting on these food processors works either clockwise or counterlcokwise - not both. Then twist the work bowl to the left (clockwise). Voila!

-Tha Mp3 Doctor

Dec 07, 2008 | Cuisinart DLC-5 Food Processor

2 Answers

Need to fit new switch assembly


Only two screws ?? this must be an older magimix 5000 machine, does the replacement part have a 10mm frame around or flush, the part you need is click here http://www.magimix-spares.co.uk/On-Off-Pulse-switch-with-frame-5000---5100-Chrome/product/101296/

Sep 15, 2008 | Magimix 5150 Food Processor

1 Answer

I have a kitchenaid kfpw760 food processor. I assembled it as per manual then added ingredients to work bowl, but...my ingredients are below the blade in the bowl and the blade doesn't contact the...


The work bowl lid has a feed tube on it, and the unit should have also come with a "feed tube pusher," a plastic piece to help depress food through the feed tube itself.

With a food processor, you will want to assemble the unit first, engage, and then add ingredients. This will ensure the ingredients fall through the blade and/or disc to be processed thoroughly.

May 11, 2008 | KitchenAid Professional KFP770 Food...

1 Answer

Food Processor won't turn on?


Food processor housings MUST be assembled in a certain order. And each part usually clicks or snaps into place. When all parts are PROPERLY assembled, the safety interlock switch will engage. Until then, no workee.

Mar 05, 2008 | Food Processors

1 Answer

Food Processor assembly


Hi Janne,

I bought a DCL 8M about 20 years ago and still have the original manual. Mashing potatoes is one of the few tasks that the manual discouraged. The potatoes turn into glue. I tried mashing potatoes with the flat blade and extra liquid. It still tasted awful. I do puree potato soup in batches, First I mash all the solids (potatoes and leek or potato and tomatoes), then add the liquid. For some reason, pureeing the soup works well.

I am sorry I could not be more helpful.
Myriam

Oct 08, 2007 | Cuisinart DLC-8S Pro Custom Food Processor

Not finding what you are looking for?
Food Processors Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Food Processors Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Ross Keen

Level 3 Expert

1225 Answers

Are you a Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...