<!-- from fixya rte -->No audio sound when i put in the cd - Computers & Internet

Go to Control panel > Add Remove programs (locate the audio driver installation) > click Uninstall (Remove).
The presently installed audio driver will be removed from the system.
Reboot the System
Right-Click 'My Computer' icon.
Click 'Properties'.
Click 'Device Manager'
Click on 'Sound and Game controllers'
Right click 'Audio device'
Select 'Update Driver'
That's all. The audio driver will be re-installed. If you have the Driver CD of the audio card, just put it into CD driver, before doing this. If you have internet connection, connect it too. If so, the system will audo-search for the audio device, and will install it automatically either from the O/S, CD Rom or by internet. [Before doing all of this, connect the system to internet, Insert the Audio Driver CD in the CD Rom (if you have it]
Gopakumar Gopalan Google

Test this setup with your walkman/ipod.

The most likely problem is in your computer's mixer selection.


Put a CD into your computer drive and play this CD.

If the CD audio output is low then dial up the mixer CD output.

If you do not has audio via CD at all then the CD drive to sound card audio cable is disconnected.

Hi friend,

firstly you check,sound driver is available in your system or not,as per your comment i think sound driver is missing in your system.
follw the given instruction and check sound driver is available on not.
1- right clieck of "My Computer" icon
2- Chose the Manage option.
3- Go to the Device Manager option
4-Check Audio,video driver (if yeloow indication are showing in audio,video option)
Thats means sound driver are missing or need to be upgrade.
(Go to control pannel and open "Sound and Audio Devices" properties if all the options under it is disable thats means audio driver is missing)
=======================================
When you parchase the system you carry a motherboard CD,put in that cd into cd drive and install the appropriate drivers,if you have no Cd in that condition you download the drivers from net,

Thanks,,,,,

if the track numbers are displayed and counting then we can assume the cd is playing. and the sound/audio decoder is defective. it is usually a large integrated chip.(VLSI).

Put your PC on. On the menu, left click, setting, control panel, and then add hardware. This is find out whether you have your sound card installed or not. If
not, have it installed by clicking on the add hardware menu. Or you can click on the Systems, then
hardware, and finally the Device Manager. Right click
on the sounds, audio to find if it is working properly. If it is, then check your speaker systems. Set the
volume to the lowest level just enough for you to hear
a sound. Plug it to a small radio output, and find out
if it has audio (sounds). No sound, replace it. If it is
OK, your have no other alternative but to install sound
driver software by CD. If this is not available, you can
download it from the internet. Type at the search en-
gine blank (Free sound, audio, driver software) and
left click the search engine. Once you have the site,
you can click at the download. Back to your PC, After completion, click the download open and install
it. Just follow the instructions and you will have sound
driver software installed. After finishing the download,
you can test it, by putting a CD inside your CD player. Click open your media player, and play.

Check your tv settings may need to change from speaker out to line out.

Check the tv input on the receiver, put the cd or dvd cables into the tv input. If you get audio the receiver is fine. No audio check the receiver settings.

check the following

Microsoft Volume Control or your mixer program mute options and volume sliders.
Connect headphones to the stereo phone jack on your CD-ROM drive’s front panel; adjust the volume control settings on the drive. If there is sound from your headphones, check the CD audio cable connection from the CD-ROM drive to the audio card.
Ensure the speakers are properly connected to the audio card’s output connector.

hope this can help

goodluck
JABEMS

try the radio only if you get sound with the radio only your c d read and audio out put is your problem

I have a Realtek AC97 Audio. I doesn't have any sound when my computers welcome screen comes and also I doesn't have sound when I play some songs. WHAT IS THE PROBLEM?.

hi u r audio drivers are not installed
so plz follow insructions
mycomputers - rihtclik n u get manage
device manager
find audio drivers n update it
i think it's will be ???(question mark) symbol
update it frm cd rom,
put mother board cd into cd rom.
ur's kishore chowdary.
+919441133420