Question about Download Youtube Videos Download Youtube Free

1 Answer

Why am being cut off on you tube while watching dvds and when I retry to open I fail to get back on

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 148 Answers

There may be a number of reasons for this behaviour.
1. some Internet Service Providers, those who provide 'uncapped' internet, tend to limit the amount of streaming media its customers may make use of at any given timeframe.
2. Youtube generates links to videos 'on-the-fly', meaning you can't copy the link to a video today and watch that same video tomorrow.. as the link would expire. You mentioned that you were watching DVDs, which means that it was not a short video, and the chance of the video link expiring due to elapsed time is a possibility.
3. Do you get an error message on the youtube page when you get cut off? If so, it might be due to either a fault on their server(s), or a fault/noise on your ADSL line, which caused the download to your cache/memory for viewing to stop.. clear the cache before attempting to open the video again:

Here's how to clear the cache in various browsers.
Chrome: Go to the wrench menu, go to "History" and click on "Clear Browsing Data." That's about all you need to do.
Internet Explorer: Open up Internet Options, and navigate to the "General" tab. Once there, click on "Delete Browsing History."
Opera: On the menu, select Tools->Delete Private Data. Once you've done this, check all the options, then confirm the deletion.
Firefox: Open up the options menu, and locate the "advanced" pane. From there, go down to "Network" and look for "cached web content." There'll be a button next to the information on how much space that says "Clear Now." Click on it.

Posted on Nov 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Cricut Explore Air wont cut


If your Cricut machine is not cutting all the way through your material, or is only scoring the material, choose a machine below for specific troubleshooting tips. Fortunately this issue can usually be resolved with basic troubleshooting.

correct cut settings.
  • Remove the blade housing, then remove the blade and ensure that there are not any bits of paper stuck to the blade or lodged inside the blade housing. Ensure that you replace the blade housing correctly into the machine. Once clean, test your cuts again. If the blade and housing are already free from debris, or cleaning it did not help, proceed to 3.
  • Try an arm buoyancy test: gently press down on the black arms that surround the blade housing and then release them. Do they bounce right back up, or do they stick or rub in any way? If they stick or rub, please contact Customer Care through one of the options below for further assistance. If they bounce right back up when released, proceed to 4.
  • Increase the machine pressure settings and try your cuts again. If this does not change the cut result, proceed to 5.
  • Increase blade depth by turning the dial at the top of the blade housing. If this does not change the cut result, proceed to 6.
  • Perform a Hard Reset on the machine. If this does not help, proceed to 7.
  • Check your machine's firmware version. If the firmware is not up to date, perform a Firmware Update using Cricut Craft Room, a Gypsy device, or Cricut Design Studio.
  • Retry your cuts with a new blade housing.
  • If the machine is still not cutting through materials, or is only scoring the paper, please contact Customer Care through one of the options below for further assistance.
  • Forced Firmware Update on the machine through Cricut Sync.
  • Retry your cuts with a new blade housing. If the issue persists, proceed to 8.
  • Attempt a Format and Restore on the machine through Cricut Sync. Please note that this step should only be taken if all other steps have failed to resolve the issue.
  • If this does not resolve the issue, please contact Customer Care through one of the options below for assistance.
  • new blade. If this does not help, proceed to 5.
  • Adjust/increase the Multi-Cut setting in the Cricut Craft Room cut preview screen and retry your cuts. If this does not change the cut result, proceed to 6.
  • Retry a cut using a new blade housing.
  • If the machine is still only scoring or not cutting through the material, please contact Customer Care through one of the options below for assistance.
  • Jan 16, 2017 | Crafts & Hobbies

    1 Answer

    Screen black fault


    black after 15mins is psu fail

    replace ALL the electrolytic capactiors on the psu
    this includes the mains 350 or 400V types
    then retry....

    try to find any faulty CCFL tubes using there feedback
    from each ccfl transformer

    you could just find one tube has failed

    look too you tube for CCFL replace etc etc
    look more to a faulty single tube here

    Oct 10, 2014 | LG 32LG30 32 in. LCD HDTV

    1 Answer

    Elba WA50T54W1 water just overflowing not cutting of when full


    water level pressure switch tube is clogged with lint or bladder in pressure switch is bad. disconnect power to washer open timer console look for a clear rubber hose disconnect fron switch and blow in tube a couple times reconnect tube and put unit on drain and spin for a second then retrying unit for water level fill put washer on small load water size and test if it continues to fill replace pressure switch...

    Jan 23, 2011 | Washing Machines

    1 Answer

    Water not cutting off at full level and leaking-Kenmore washer 80


    The water lever sensor/switch is not working and needs to be replaced. IT has a air tube that senses the water lever by pressure. It the tube is clear then the switch needs replaciing,, If they is a clog, clear it and retry before replacing it.

    Feb 06, 2010 | Washing Machines

    1 Answer

    2 flashing red lights


    Two flashing red lights means it has overheated. Maybee it does have alot of ventilation but the dust may have ecumulated to an amount that can not escape the system case. Clean it really well with a can of compressed air and make sure fan is running in the back. Some fans fail but continue to spin so if it looks to slow it probably is. You can watch you tubes tutorials about opening and cleaning your console. Hope this helps. Good Luck.

    Nov 23, 2009 | Microsoft Xbox 360 Console

    1 Answer

    My preasure switche is stuck open what can i do


    often times you can just pull the vacuum tube off the switch and blow back thru it to clear. more stubborn clog may require removing tube from other end which would be on the induced draft motor and try to clear with a paperclip. then reinstall the tubing and retry

    Nov 13, 2009 | Goodman GMS90703BXA Heater

    1 Answer

    Hi I have an LG DVD±RW, it used to work properly but few days ago i tried to burn an iso. image it didn't work Device: [1:0:0] HL-DT-ST-DVD-RAM GSA-H55N 1.02(E:) (ATA) Firmware Version: 1.02...


    According to the log file, there was a spindle servo failure. The spindle servo is responsible for maintaining rotational speed accuracy. I'd say your drive is pretty much dead. See if you can read a disk in the drive. I wouldn't be surprised if it had a tough time just reading files.

    Jan 23, 2009 | NEC ND-3500A DVD±RW Dual Layer Burner

    1 Answer

    Zenith tv no pic


    You have a picture when you're watching a DVD, but none when you're watching regular cable? Does the audio appear to be okay?? Are you sure you've switched the inputs on the TV back to main???
    Let me know..
    Bill

    Dec 08, 2007 | Zenith B25A24Z 25" TV

    Not finding what you are looking for?
    Computers & Internet Logo

    81 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Download Youtube Videos Computers & Internet Experts

    Martin Murray

    Level 3 Expert

    1623 Answers

     Grubhead
    Grubhead

    Level 3 Expert

    5020 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18390 Answers

    Are you a Download Youtube Videos Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...