Question about Toys

Open Question

I have a tinkerbell lamp from KNG America. The motor that moves tinkerbell and turns on the light no longer works. Is there a part that can be purchased?

The lamp doesn't work and I need a new motor. Can this part be purchased?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: KNG America Harley Davidson Motorcycle Lamp Repair.

Big tip 'o' the hat to harleyds96 for giving me the impetus to get after it and tear the lamp down and sort it out. You'll need a precision Phillips #1 screw driver to remove the 8 screws. You'll have to pry the 4 little rubber pads off that double as screw hiders
Once you've carefully separated the bottom plate from the rest of the pedestal, you'll see that you need an extra set of hands to hold the plate, amber glow ring, and the main lamp body with, while you fight with the little fuse box in the center of the lamp.
They all have to be held, because the speaker wire runs through the amber ring to the bottom pad, and can't be unplugged, 'cuz it's soldered. No spade connectors, nah, that'd be too easy - and complicated. They'd like to make it so much easier to toss out another $80 for a replacement, 'cuz you stupidly lost the receipt!
So now that you've got everything separated, you discover that there's another two screws holding the ends of the fuse box to the main body of the lamp. Yes, they must be taken out too, so's you can properly fight with the four little clasps holding the fuse box together!
If you can get it popped open without ripping wires from their solder connection, you're a neurosurgeon! I lucked out, 'cuz I did the operation whilst sitting at the computer desk, so the bottom two pieces could rest on it, without ripping the speaker wires off of the speaker, while at the same time, the main body of the lamp was resting in my lap.
Now that you've succeeded in getting the box open, you'll see that you have that little fuse there, that the Harley lady mentioned above found. It's stamped - 1A/250 V, which, I suppose, would mean it could be plugged in down undah, where they use 240 volts.
So I'm going to see if I can find a 2A/250V fuse somewhere, and if that's too hot for it - TOUGH! I'll have a Harley Davidson plastic patty melt! vonster.vaughn

Posted on Oct 10, 2010

  • 689 Answers

SOURCE: kng america princess lamp will not work

The princess has went bye bye.

Posted on Nov 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Schematic or replacement complete circuit board for Harley Davidson heritage V lamp made by KNG America. The incandescent bulb is fused, the other running lights and orange base light are inop.


Hi, Robert the answer to this question is way above my pay grade for this situation, I would call or visit the place where the lamp was purchased.
Good luck and have a wonderful day.

Jun 03, 2017 | Harley Davidson Motorcycles

1 Answer

Globe doesn't light up any more.


You can customize it and make it work again

Nov 28, 2013 | KNG America Geography Astronomy Globe

1 Answer

Head will not move


I have the same problem. Did you have any luck fixing it?

Sep 20, 2013 | KNG America Telemania Star Wars R2D2...

1 Answer

Kng america princess lamp will not work


The princess has went bye bye.

Nov 10, 2012 | Televison & Video

1 Answer

Does kng america have a 1 yr warranty for this lamp?


This is the problem with cheap lamps--Generic they are called--the lamp itself may have melted some plastic in the set--set needs to be opened and examined for damage---most OEM lamps come with 1 year warranty--get what you pay for......


Is this by any wild chance a Sony set?

Apr 29, 2012 | Televison & Video

1 Answer

Can I turn the lamp on fron a switched recpt or do I always have to push the button on the lamp?


I think you still have to push the button even if the power switch is on just to kinda get everything started, It will turn on the light & any neat movement &/or sound effects that it makes will happen & if it's anything like my daughters lamp that's similar to this, if you push the button a second time, music and sound will happen again but then the light will shut off. I'm not positive that i'm correct & apologize if i'm wrong but my daughter has a Disney dancing princess lamp & thats how it worked. It also had a switch to turn on or shut off the sound so i hope I helped somehow now that i've written a novel that should have been 1 or 2 sentences. Sorry

Jul 03, 2011 | KNG America KNG Disney Fairy's Animated...

1 Answer

. Plugged it in and


noavatar.png
  • lopeka
  • 4 minutes ago
That was a long time ago, 2008, but as I remember I went Through KNG America and purchased a new sound board for $28.00. U will have to have a solder gun and remove the old board and solder in the new one. It totaly fixed mine works great. Here is a link, as I recall I asked to talk to tech support, give the make model # ect of the radio, explain the prob, and ask for a replacement sound or tunner board( I can not remember what they called the part) http://www.manta.com/c/mm7jbzb/kng-america In the event the link dose not work there phone # is (631) 389-5642. PS. kng stands for Kash N Gold Ltd, if u need to do some searching. Good luck, Hope I was of some help.

Apr 03, 2011 | Jeep JX-CHR Boombox

1 Answer

I HAVE A KNG AMERICA HERITAGE SOFTTAIL LAMP THAT HAS A NIGHT LIGHT AND MAKES ENGINE SOUNDS THE BULB BLEW OUT AND NOW THE LAMP WONT WORK AT ALL NOTHING


Hi Cruzn2006, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Jun 16, 2010 | 2003 Harley Davidson FLSTC Heritage...

1 Answer

KNG America Harley Davidson Motorcycle Lamp Repair.


Big tip 'o' the hat to harleyds96 for giving me the impetus to get after it and tear the lamp down and sort it out. You'll need a precision Phillips #1 screw driver to remove the 8 screws. You'll have to pry the 4 little rubber pads off that double as screw hiders
Once you've carefully separated the bottom plate from the rest of the pedestal, you'll see that you need an extra set of hands to hold the plate, amber glow ring, and the main lamp body with, while you fight with the little fuse box in the center of the lamp.
They all have to be held, because the speaker wire runs through the amber ring to the bottom pad, and can't be unplugged, 'cuz it's soldered. No spade connectors, nah, that'd be too easy - and complicated. They'd like to make it so much easier to toss out another $80 for a replacement, 'cuz you stupidly lost the receipt!
So now that you've got everything separated, you discover that there's another two screws holding the ends of the fuse box to the main body of the lamp. Yes, they must be taken out too, so's you can properly fight with the four little clasps holding the fuse box together!
If you can get it popped open without ripping wires from their solder connection, you're a neurosurgeon! I lucked out, 'cuz I did the operation whilst sitting at the computer desk, so the bottom two pieces could rest on it, without ripping the speaker wires off of the speaker, while at the same time, the main body of the lamp was resting in my lap.
Now that you've succeeded in getting the box open, you'll see that you have that little fuse there, that the Harley lady mentioned above found. It's stamped - 1A/250 V, which, I suppose, would mean it could be plugged in down undah, where they use 240 volts.
So I'm going to see if I can find a 2A/250V fuse somewhere, and if that's too hot for it - TOUGH! I'll have a Harley Davidson plastic patty melt! vonster.vaughn

Jun 14, 2010 | Harley Davidson KNG America 026711...

Not finding what you are looking for?
Toys Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

ray gallant

Level 3 Expert

41378 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...