Question about Sunbeam Electric Blanket Dual-Controller - Style B85KQP 360 Watt

1 Answer

What do you do when an electric blanket heating control has had something spilled on it?

The controller is stuck and won't turn because something has been spilled on it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hi Ann; Make sure the power is off,Then see if there are screws to take it apart,if not you may be able to pop it open with A screw driver. If you get that far take A Q tip and dip it in rubbing Alcohol and clean parts inside, wait 5 Minutes for Alcohol to evaporate and re assemble. Plug in and try it. Hope this works for you it worked for me but it was very hard to get it apart.Good luck

Posted on Nov 07, 2014

  • Ann Watts
    Ann Watts Nov 07, 2014

    Thank you so much! It makes sense. You are the only person who had an answer.

  • fasteddy23
    fasteddy23 Nov 07, 2014

    Your very welcome Ann,Hope it works......Ed

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for a replacement for 1 of the controls for my heated mattress pad. Where can I find 1?


www.sunbeam.com/.../bedding/controls/bedding-contr...

Sunbeam ProductsHow do dual controls work? The dual ... What if my control does not regulate my side of the warming product? ... Where can I purchase replacement controls?

Finding Replacement Cords and Controls for an Electric ...

www.thriftyfun.com/Finding-Replacement-Cords-and-Controls-for-an-El...
... blanket. Finding a replacement cord or a control for an electric blanket can be difficult. ... My blanket was under warranty and I got one for free. If yours is out of ...

Finding Replacement Controls for a Heated Mattress Pad ...

www.thriftyfun.com/Finding-Replacement-Controls-for-a-Heated-Mattre...
This is a guide about finding replacement controls for a heated mattress pad. It can be very frustrating to find replacement ... Read all 1 Answer ... Where can I findreplacement controllers for my Living Quarters heated mattress pad? By Steve.

Replacement Controls for a Sealy Electric Blanket ' ThriftyFun


Dec 07, 2015 | Sealy Heated Queen Size Mattress Pad - -

1 Answer

One control works and not the other control


I have a Sunbeam electric blanket. One control is blinking F2. How do turn that off?

Mar 05, 2014 | Sunbeam California King Arlington Heated...

1 Answer

Dual control electric blanket doesn't get warm, the controllers just blink


The problem can be caused by a defective heating element in the blanket.

Nov 24, 2013 | Sunbeam Electric Blanket Dual Controller...

1 Answer

Electric blanket won't heat


Take the help of your mattress pad company or look into instruction manual. Do not operate it unless you are familiar with it. You should call the customer care to know how to operate.
Jack from Coriumdirect Mattress pads

Apr 07, 2013 | Biddeford Blankets Heated Mattress Pad...

1 Answer

I received this electric blanket as a gift and it will not heat up on either side. There is no light on the controls when I turn the blanket on. I need my blanket to work - it's like brand new!


Appears to be that the power is not getting to the temperature controllers. Suspect a problem in the wiring between the wall outlet (if not the wall outlet) to the temperature controllers. Look for broken plug at end of cord or a break in the cord between the plug and the controller. Last, you may have to look at the connections inside the temperature controller the power cord goes to in order to see if there is something loose inside. But do this with the blanket unplugged.

Sep 18, 2010 | Sunbeam Vacuums

3 Answers

Electric Blanket Control Blinks


mydual control sunbeam electric blanket blinks on one control

Dec 23, 2008 | Sunbeam 4237 / 4238 Iron with Auto...

Not finding what you are looking for?
Sunbeam Electric Blanket Dual-Controller - Style B85KQP 360 Watt Logo

Related Topics:

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Home Experts

topcat7736

Level 1 Expert

28 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14584 Answers

rhodesworks

Level 3 Expert

3082 Answers

Are you a Sunbeam Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...