Question about Televison & Video
You might need wireless dongle might not have built in wifi i had same problem with a sharp tv
Posted on Nov 07, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: samsung 46'' LCD TV series 6
NOT ALL CHANNELS ARE BROADCAST IN FULL TRUE HD...NICE TV...HAVE ONE MYSELF...BUT I CANNOT WAIT FOR THE 3D TV,S TO COME OUT(WILL NOT BE LONG)
Posted on Mar 10, 2009
I just fixed this very same problem. It is the capacitors are the problem. However, I think that if you have some minimal skills with soldering, you can fix this yourself. You just need to take out the system board, then the power supply parts are on the top right. The bad capacitor(s) will be bulging at the top and possibly have some brown stuff coming out. The ones that go bad are 1000microfarad, 10V, however you can replace them with higher voltage. I got 35V caps from radio shack for 1.59 each. You just need to solder out the bad ones and then put the new ones in and solder. Remember that the negative end goes on the side with the bold black part of the circle on the system board. Then just cut off the extra ends of the capacitors. If you are capable of doing this yourself, you will spend at most 6 dollars instead of however much a technician costs.
Posted on Sep 25, 2009
Tips for a great answer:
Mar 21, 2017 | Seiki Televison & Video
Mar 31, 2015 | Samsung UN46D7000 46 Inch 3D 1080p Smart...
Oct 20, 2013 | Generic F46K20E Hisense 46 in. LCD HDTV
Aug 18, 2011 | Sony KDL46HX800 46 in. 3D LCD TV
Checking the Router's LEDs
Make sure the System LED is lit.
NOTE: If the Diag LED doesn't goes off, you need to upgrade the router's firmware. For instructions, click here .
Make sure the LAN 1-8 ports is lit depending on the computers connected to the designated Ethernet port.
NOTE: If the LAN 1-8 port is not lit, make sure that the computer is powered on. You can also try connecting the PC using another working cable.
Make sure the Internet (WAN1) and DMZ/Internet (WAN2) LED is lit.
NOTE: If the Internet or DMZ/Internet LED is not lit make sure the Broadband modem is powered on and that the modem is properly connected to the Ethernet port
You can access the web-based user interface utility of the RV082 by using one of two methods:
1. Open a web browser (Internet Explorer or Netscape Navigator)
· By IP address: Type http://192.168.1.1 (192.168.1.1 is the default IP address of the RV082)
and click Go or press the [Enter] key.
· By Hostname: Type http://RV082 and click Go or press the [Enter] key.
2. When the username and password prompt appears, type admin in both the username and password fields. (admin is both the default username and default password for the RV082).
Nov 08, 2010 | Linksys RV082 Router (RV082-AU)
Jun 21, 2010 | 2wire (1000-000057-000) Modem
Feb 07, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV
53 people viewed this question
Usually answered in minutes!