Question about Emerson LC320EMX 32 in. LCD HDTV
It was plugged into a power strip with Direct TV box, wireless Internet box, DVD player, etc. Everything else still had power. I even plugged something else into that plug and it worked so it's definitely the TV. Is there a reset button or something?
Try unplugging the TV for a time, like 20 minutes and then plug back in.
Posted on Nov 07, 2014
Might be your power supply or the invertor in that case when there is no light at the front, if there is light and it's flashing, how many times does it flash? Try to get the sevice manual (not the owner's manual), if you have some experience in electronic. I would first go for the Power supply board. The only way if you have no electronic experience is to go in a repair shop and get an estimate price of the repair but be carefull in the choice of the repair men because they all are always trying to get you ($), making money. Sorry i can't not check it myself across internet. Good luck. Serge.
Posted on Mar 05, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have an Emerson TV 32
i turned on my tv and it blinks green continuesly. it wont turn off to red light. i unpluged it for 30 min. repluged it and green light comes on and wont stop blinking
Posted on Jan 22, 2009
I own the same TV and had the same problem.
It's the #1 plaguing issue with flat panel TV made by Funai corp. Emerson is made by them.
Normally, when this happens, the TV goes into " Protection Mode " because of a failing circuit board.
The most common thing to go out on flat panel TVs is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board. But, I can't say it's 100% the problem because I can'tactually look at the tv over the internet. I can only make guesses with the symptom. I'm willing to bet you have the same problem like mine. One of six Inverter Transformers when bad on my Power/Backlight Inverter Supply Board. I replaced it and it works fine again.
You have a few choices:
1. You can try leaving the TV unplugged for 30 minutes so the TV can reset itself.
2. If by chance the TV is still under warranty, go that route.
3. If you have some electronic experience, if you can find and purchase a Service Manual at Tvtechcenter.com; It will help you diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists.Usually, cost under $6. And most cases the new part cost less than $15. The service manual at the site is under LC320EM82S.
4. Pay a TV shop to do the repairs. It maybe costly, but get an estimate of how much they will charge. That way you can decide if it worth repairing or replacing the whole TV.
I hope I shed some light on the subject for you.
Posted on Jul 13, 2009
SOURCE: LC320EM8A 32
I'm glad your getting somewhere with your research. If you arent getting even a standby light, try checking the plug fuse and if this is ok, then the power supply board inside the tv is faulty. Could even be the power pcb fuse or dry capacitors (bulging tops on faulty ones). Hope this helps, and good luck :)
Posted on Feb 14, 2010
Tips for a great answer:
Nov 29, 2012 | Sony KL-50W2U
May 13, 2010 | Sylvania LC320SS9 32 in. LCD TV
Sep 22, 2009 | Sony Televison & Video
Jun 26, 2009 | Olevia LT37HVS 37 in. LCD HDTV
Mar 12, 2009 | Televison & Video
Aug 25, 2008 | RCA HD52W56 52" Rear Projection HDTV
May 15, 2008 | Televison & Video
Sep 27, 2007 | Televison & Video
115 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: