Question about Audio Players & Recorders

1 Answer

Pioneer receiver Pro-RO5U works with coax ant inputs but not HDMI inputs 1 or 3 (with HDMI inputs enabled). Fixable?

Works only with coax antenna inputs but not known proven HDMI input.

Posted by on

  • 4 more comments 
  • Lawrence Oravetz Nov 06, 2014

    Hi Jim Lapke, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? What are you connecting to the HDMI ports?

  • Jim Lapke
    Jim Lapke Nov 06, 2014

    Connecting Xfinity DVR HDMI output (works OK with test TV) into HDMI 1 or HDMI 2 input to receiver. Can not bypass into plasma TV because it has no HDMI input, only the cable set into the revivers. This set up worked last in May before I left the power unplugged until a week ago. Now it only works with the coax output from the DVR box into the Ant A or B of the receiver. Of course the picture is not the Hi Def you get with the HDMI connection.

  • Jim Lapke
    Jim Lapke Nov 06, 2014

    Tried with HDMI enabled at set up and either input 1 or 3 selected all done thru the remote. BTW the HDMI 1 input worked in May and the DVR, TV & receiver have had the power unplugged until now.

  • Jim Lapke
    Jim Lapke Nov 06, 2014

    HDMI is enabled at set up and the input HDMI 1 or 3 are selected (confirmed on the display). The HDMI input worked OK 6 months ago and the DVR, TV & receiver have had the power unplugged until now.

  • Jim Lapke
    Jim Lapke Nov 06, 2014

    Disabling the HDMI inputs and/or not selecting them with the remote does not change the condition. BTW the HDMI 1 input and this DVR box worked in May and the power has been unplugged until now.

  • Jim Lapke
    Jim Lapke Nov 06, 2014

    Receiver, not revivers - sorry.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 166 Answers

Board replacement to repair

Posted on Nov 26, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: No video throught HDMI output

press set up go option number 1 then go hdmi monitor and input yes. then press set up again

Posted on Dec 11, 2007

  • 1 Answer

SOURCE: No sound from optical or coax digital inputs

You have to use the system setting using the remote and turn on the inputs you want to use. Hope this helps.


Keith

Posted on Apr 12, 2009

  • 4 Answers

SOURCE: HDMI Compatibility

It sounds to me like you have a HDMI Control issue. It sounds like the DVD player wants to control the receiver. Try turning off hdmi control on the TV, reciever, and the dvd player in their setup menus.


Let me know if this helped,


Joe

Posted on Jul 13, 2009

  • 1 Answer

SOURCE: HDMI video not functioning on a new Onkyo TX-SR606

For me, it was the Monitor Out setting that had defaulted back to Component. I remembered to change the individual inputs to HDMI - but had forgotten to set the Monitor Out to be HDMI.

Posted on Apr 30, 2010

dunnbiker
  • 8546 Answers

SOURCE: No signal is coming out

http://www.retrevo.com/support/Yamaha-HTR-6240-Receivers-manual/id/23270dj799/t/2/


Page 42:

Function Setup: Set to ON to pass through HDMI In to HDMI Out

Page 49:

The number of HDMI components is over the limit. ?? Not sure what that means but dropping one HDMI might be a good test.

Posted on Feb 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have no signal,what can I check?


OK Joan,, I might need more info. not getting signal could be caused from several things.. one make sure the Dish Antenna is mounted correctly, (level, and true, [one degree off on earth is like 700 miles off at the Satellite.]) check you cables and make sure they is now wire touching the center core of the coax. if the coax has splitters, connections etc outside check for the corrosion inside the threads.
make sure the coax coming into the house is connected to the right place on back of the 222k. make sure u are on the right Video stream for the HDMI. are u getting any picture showing the Dish set up or is the screen all Blue.. if it is blue try to use the remote that came with ur TV (RCA, Vizio, Phillips,,,,etc) and look for the input, source , or Antenna button and push it to match your HDMI input..

Oct 28, 2014 | DISH Network Vip 222k Hdtv Satellite...

1 Answer

Pro 435pu


that should find it automatically just turn your computer on and tv and set to hdmi 1 or whatever it should be there shoud no have to set anything up if it is a newer macbook pro or something , goto youtube if this does not work

Mar 28, 2014 | Televison & Video

1 Answer

How do i hook up an antenna to the pioneer sx-950


There are two antenna sources on the Pioneer SX-950.

Both of these outputs are located on the rear panel of the receiver. The AM is a permanent mount. The FM is standard RF/Coax which will run to your antenna.

Antenna Inputs: FM 75 ohm, FM 300 ohm
Am Ferrite Bar Antenna

Hope this helps,
TechGuy21
A

s

Jul 04, 2011 | Audio Players & Recorders

1 Answer

Can you tell me what are the functions of the two hdmi inputs, and the one hdmi output ,as my cable only works via the tv to the dvd player and a coax from dvd to the coax on avr, so hdmi on avr is...


Let's treat this as TWO functions - audio and video.

Your best video would be HDMI output (audio & video) from the cable box and EACH other video source (BD/DVD) directly to your TV and receiver. But, I'd still WATCH the video from the direct TV connection. The fewer intervening cables and electronics, the better.

Your best audio performance will come directly from each multichannel source via a digital (HDMI, coaxial or optical) cable to the receiver. I would LISTEN to audio through the receiver for best quality.

See a trend here? TV's best at video; receiver is the master of audio.
And neither one adds much by handling the other. Usually the opposite.

You mention coax. Do you mean coaxial digital audio????? As coax is also shorthand for the thick black cable bringing video to most cable boxes, connecting antennae to TV's and such.

You don't actually define what the problem is. Only YOU can be the judge of what 'better' is.

There are a multitude of (mis)settings you should master before declaring a hardware problem. I'd dive into the manual.

Aug 03, 2010 | Denon AVR-1508 Receiver

2 Answers

I cannot get the Input 3 HDMI port to work. The Input 3 Componet videoworks, but when I unplug the componet video and put in HDMI port nothing works. I do have something else in the HDMI Input 1 port...


Hi.

To start ensure that each time you connect or disconnect the HDMI ports both TV and connected device are off.

Also ensure that HDMI input is active, as detailed here.

HDMI connectors carry voltage, and connecting the HDMI cable while TV or device is on may easily damage the HDMI port, making it unusable.

The HDMI 3 and Component 3 are separate input. The component input may work, and HDMI port may still be defective.

To test the port do the following:

Disconnect TV power cord, and connected device (eg. Receiver, DVD etc.).
Leave units disconnected for five minutes.

While power is disconnected, test connecting on port three a device that was previously working on HDMI 1. Also use a cable that you know is working.

Connect back power with HDMI cable already connected. If HDMI 3 is still not detected, then the port is defective.

In that case ring Pioneer at the number listed on the owners manual.This model is often advertised as only two HDMI inputs. Call Pioneer to ensure the third port can be enabled.

Dec 26, 2009 | Pioneer PDP-4350HD 43 in. Plasma...

1 Answer

Pioneer receiver VSX-D411


Yes techtod you are right you do have to tell the receiver what you want it to do usually on the front panel you can access set up menu and go into input set up This is an example Say you plugged the dvd into optical one or coax 1 you must go to the input that says dvd click down till you highlight dig input and then select optical 1 or coax 1 there can be as many as 8 digital inputs so just check wich one you plugged it into and then tell the amp then you should be back to watching your digital movies

Mar 21, 2008 | Pioneer VSX-D411 Receiver

2 Answers

No HDMI video output from AVR-588 receiver to plasma TV ???


the avr-588 apparently cannot carry sound via hdmi - don't know why; just what i found out from the geek squad at best buy; solved the problem by connecting optical cable from cable box to receiver; be sure to change the input on the receiver for opt-2 (system setup >2 inputs) to correlate with tv

Feb 16, 2008 | Denon AVR588 Receiver

1 Answer

My ilo has the built in atsc tuner


Try plugging in a powered antenna.  
The DTV coax input is for over-the-air HDTV transmissions which vary depending on your location and surrounding buildings.  I have the LCT32HA36 hooked up to a powered antenna and it works fine, but it wouldn't work when I plugged in the cable from the wall.

Jan 22, 2008 | iLO LCT32HA36 Television

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5259 Answers

The Knight
The Knight

Level 3 Expert

74666 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...