Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

How to get a third computer to work on my wireless network

I have set up a wireless home network so that my wife and daughter can use the internet, im a real novice at computers, but iv seemed to have my wifes up and running. My daughters i am having real problems with.I cannot get it connected,on her computer the wireless adapter is working fine, but it keeps coming up with not connected,cannot find server. Im i missing something i dont want to mess around to much incase i knock all the settings and end up worse than iam now

Posted by on

  • 4 more comments 
  • computernerd Nov 11, 2007

    yes the adapter is connected to router it is wep, and the firewall is disabled.i forgot to mention that my wife and daughter have their own computer they have a wireless adapter on each of computer is the main server. still no luck with getting my daughters computer to work the internet.

  • computernerd Nov 12, 2007

    Hello osborne382

    The settings you asked for are as follows:



    default gateway:

    My daughters wireless adapter is a philips SNU5600, will this be ok to work the internet,her computer says its all working properly.

  • computernerd Nov 12, 2007

    hi again,

    these are the settings that came up:


    reply from 192.168.22:bytes=32 time<1ms til =128 this line was repeated 4 times.

    ping 192.168.21:bytes = 32 time<1ms til =64 this line was repeated 4 times

    then ping statistics for

    packets sent = 4 recieved = 4 lost = 0% loss

  • computernerd Nov 12, 2007

    what does that mean in computer terms what do i try next

  • computernerd Nov 13, 2007

    hi there, iv had a look at the settings on my daughters computer,in the same way as i checked on my own computer these are the settings on hers:

    ethernet adapter wireless network connection 2 (this is the wireless adapter key i think)

    media state diconnected

    c:/documents and settings\administrator >ping

    pinging with 32 bytes of data

    destionation host unreachable (this line is repeated 4 times)

    ping statistics for

    packets:sent recieved = o = lost = 4 (100%).

    could this be the problem some how.

  • tswilsonms Oct 02, 2008

    I can connect my laptop when it has been disabled from security purposes, but when we try to make it secure it will not connect..



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 306 Answers

Is the adapter connected to the router? are you using wep? is the firewall disabled?

Posted on Nov 11, 2007

  • 3 more comments 
  • cory casper
    cory casper Nov 11, 2007

    click start, run, type:cmd, hit enter, type: ipconfig, hit enter, should see 3 address's (IP, DNS, Default Gateway).

    tell me what those address's are.

  • cory casper
    cory casper Nov 12, 2007 we are going to ping 2 of those address, in the cmd black window type: ping, then hit enter....looking for 4 packets sent and 4 recieved, do the same for the default gateway. let me know the results

  • cory casper
    cory casper Nov 12, 2007

    that means that either the NIC is hardcoded with the wrong address's or is bad

  • cory casper
    cory casper Nov 12, 2007

    go to start, control panel, network connections, locate the adpater your using, right click it, select properties, highlight tcp/ip, click properties, and insure that "automaticly detect is set for both IP and DNS. if they are already like that, then you need a new Network interface device (NIC). about $15 at walmart.

  • cory casper
    cory casper Nov 13, 2007

    alright, what you did during those pings was asked the computer to send a signal to the NIC in the PC, since it failed and lost all 4 pings means its not working and mostlikely faulted and needs replaced. That will solve the issue.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Home computer with no internet service at all and someone is on our computer some how and looking in to our house how and who is it

Without knowing more about your setup, there are a few ways this can happen. First, some computers allow remote connecting via Bluetooth so check your Bluetooth security settings to ensure nothing is paired up that shouldn't be. Second, if you have a wireless network people can still connect to it even if no internet is present. Third, if your home computer has it's wireless active there is a very remote chance it could be mistakenly configured so someone could connect directly to the computer. Network security is a big deal and any wireless source could give an outside individual access to your network. That said, without the internet the individual would have to be local and pretty close to your wireless source, so it shouldn't be too hard to find out who it is.

Jan 03, 2014 | Computers & Internet

5 Answers

My daughter works at home as a Customer Service Rep. for Generation Networks ( She has a terminal from work and it is configured for her to work from home. She has done that for over a year...

This is only a problem with the firmware of your modem/router that you need to update it, because a network device like a modem and router that is working fine for severla years and suddenly stop working you just need to update the firmware of it and it should be working fine again, to update the firmware of the modem/router just need to call the manufacturer for that....

Hope that helps.........

Oct 05, 2008 | Computers & Internet

1 Answer

Following the steps outlined in the wizard I did manage to install the print server utility on one of our computers (my wife's notebook / Windows 7) and get it to print successfully. However, when I...

Oddly enough I did almost the exact same thing. I sucessfully installed and printed a test page on my wife's Win7 notebook, and was almost ready to install on my XP Pro notebook and daughter's computer. When I got it installed on my XP Pro notebook, it failed. Since then I have been trying to get the network to see it. It doesn't work! Even when I hardwire plug directly into my router, the router does not acknowledge something is plugged in. To eliminate the possibility of faulty networking cable, I used the same port and cable for my Apple TV unit. It worked just fine. The the TEW-MP1U appears to be a brick at this point. It only gives a green status light, my appears to have no network functionality any longer, wired or wireless. What gives?????????????

Apr 02, 2011 | Trendware (TEW-MP1U) Print Server

1 Answer

My daughters Dell inspiring computor no longer logs onto the Internet at home through our wireless network. It seems to have frozen onto an unidentified network from a public place and I can't seem to get...

The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, it needs the router'swireless settings configured ie SSID, WPA or WPA2 encryption key and also thewireless cards in all the laptops and or computers needs to be configured withthese router's wireless settings. Then the laptops and desktop computers cancommunicate with your wireless router.

Mar 11, 2011 | Dell Computers & Internet

1 Answer

Im a new compaq presario cq60 owner- im trying to setup wireless network at my only option in my area- have a 2wire 2701hg-b wireless router and cant get it to work internet,wireless only with...

You will need to check the wireless settings of the router.
You said that it works only with the ethernet connection but not with the wireless connection.
Check the IP address of the computer when it is connected with the cable to the router. note down the default gateway number.
Open the set up interface of your router with the Default gateway number.
once you are able to open the set up interface of your router, you will be able to change the wireless settings of the router.
after that you will need to conncet to the wireless network on your laptop.

Click Here for more Information

Oct 06, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Unable to send emails but able to surf internet.

you have to set up where outlook is sending the mail IE: pop3, or stmp @ whatever your internet provider is

Jul 12, 2009 | D-Link DIR-625 (790069292637) Wireless...

3 Answers

Unable to get wireless connection at a new location


Verizon uses PPOE(point to point protocol over ethernet) and Comast does not use PPOE. Therefore she needs to get inside the router & pdw: admin) to disable the "PPOE". Oh and also, the router needs to be hard wired to the computer for reconfiguration to take place...hope this helps

May 18, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

How to wirelessly access HP Laserjet 1320n via Apple iBook

You need to disconnect the USB cable and set it up wireless on both units:
Since it is plugged into the router, it should already have an IP address.
Un-install the printer from the computers.
Then re-install the printer from the cd or from HP's website. When you get to the point where it ask you is the printer is attached to the computer or is it over the network. Choose over the net work and the software will find the printer IP and finish setting it up wireless.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 13, 2009 | HP PhotoSmart 1215 InkJet Printer

1 Answer

Can't connect new laptop to internet through wireless

Hi...if you mean the network key, the key Windows asks for when you try to connect to a secured network, you can find this within your router settings.
As this is a 2wire model, you might also find it on a label on the router - it depends if you changed the default settings.

Please visit this page for help:

- it will show you where the default network key is on the label, or if you have changed it, how to login to your router and to find it in your settings (see screenshot at base of page - your network key will just be labelled 'key'.....)


Jan 27, 2009 | 2wire HomePortal 100W (1000-400026-000)...

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides