The handle on my baby jogger city select seems to have broken. When I push it in to recline the seat it just stays in and won't lock into position so my boy is just constantly laying down. Please help as is so frustrating.

Seating configurations are on the baby jogger website and yes you can use 2 both parent facing tried to upload a pic but it wouldn't let me

Re: Baby Jogger Broken Footrest
I just had this problem on my Baby Jogger City Versa. I had to get creative as both buttons were missing. On each side there will be two open slots. You can use a flat screwdriver on the side without a button and insert the screwdriver into a slot and push til you feel it go in, while pushing the button on the other side. You will probably need someone to adjust the footrest while you hold both sides in. It's a pain but it will allow you to get it in the position you want. I'm looking into whether I can get replacement buttons but haven't found anything yet :( Hope this helps!

Hi Magda,

We recommend you contact Baby Jogger for assistance.

Genuine innovation doesn go un noticed

Hi Kay

We would recommend you contact Baby Jogger for assistance.

Contact Baby Jogger

Hi

We'd advise you to contact Baby Jogger customer care http://www.babyjogger.co.uk/contact.php

It's hard to describe with words. I would suggest you to watch video reviews on how you can attach your car seat. Also you can get help from your manual book which you got while purchasing the stroller. Hope that will help. Visit here for more: Best Twin Pram For The Money in 2017 Tested and Reviewed

go to www.buggypitstop.co.uk they do repairs or ask Fred for free advice on that site.

The manual on how to do this can be found at www.babytrend.com.

To attach the Baby Trend Infant Car Seat, recline
the seat all the way back.
• Position the Infant Car Seat, facing toward the
rear of the jogger, so that the seat shell goes
into the Child Tray and latches into place.
(Fig. 13a) Check that the Infant Car Seat
is firmly locked onto the Child Tray before
using.
• Check that the front Child Tray is firmly
attached to the jogger's armrests. Make sure
that the car seat locks into the front Child Tray.
Then turn tabs on stroller frame to lock the
front of the car seat into the stroller. (Fig. 13b)
• To remove the Infant Car Seat, squeeze the
release handle located at the foot-end of the
seat and carefully lift upward on the seat.

Hopefully that helps!

TO FOLD STROLLER
• Close the canopy as described in the canopy section. Recline seat by releasing buckle as described in seatback positioning section.
• The stroller is folded by simultaneously pulling each trigger fold. . When the fold latches are released, the handle will begin to fall toward the floor. Release the fold buttons and press downward on the stroller handle until the stroller is completely folded. Secure the stroller in the folded position by hooking the fold latch, located on the right side of the stroller, over the rivet that protrudes from the frame.
CANOPY
* The canopy features a ratchet system that allows the canopy to be moved forward to block the sun or wind. To adjust the canopy’s position, push forward or backward on the canopy until the canopy is in the desired position. See figure 23.
SEATBACK POSITIONING
* The seat has a multiple position recline that is controlled by a strap and buckle assembly behind the seat. . To recline the seat, loosen the strap through the buckle and adjust to the required recline position. To place the seat back in the upright position, press upward on the seat back with one hand while pulling the strap through the buckle with the other. The strap will lock automatically.
http://www.babytrend.com/download/2007061021349109CT_instructions.pdf

there is a small metal handle behind each seat, pull it up while you move the seat into the recline position you want - rear seat has four positions, front seat has two. :) Jan.