How to do a cold wash on this machine?

Free manual from Sears:

https://www.searspartsdirect.com/partsdirect/user-manuals/ffle3911qw0-frigidaire-parts-manual


https://www.searspartsdirect.com/partsdirect/user-manuals/ffle3911qw0-frigidaire-parts-manual

http://www.gorenje.co.uk/support/manuals

You can down load an electronic copy at http://www.washingmachine-manual.com/whirlpool-awod-6100.html in a .pdf format. Save it to your computer if you do not require a full printed copy. Once saved, you can print select pages whenever needed.

Unplug the laptop from the power supply. Remove the battery. Locate your user manual (hard copy or printed from the internet for your laptop's make and model). Now, open the bottom of the laptop, locate the memory bank and follow instructions for memory installation provided by your laptop manufacturer in the user manual.

You do not state the type of machine you have so it is difficult to solve your problem. Most current machines feature a PDF copy of the users manual on the installation CD that you could print out to obtain a hard copy. If you have an older printer, you should check sources like Ebay or local used computer shops as they sometimes have manuals for sale.

Have the shipping bolts been removed? Look in the user manual to locate these.

Hello Friend, I think your machine will work properly if you add a water line splitter. You would connect to the single cold water tap and on the other end you would have two water hoses . Connect one hose to the cold water inlet of your washer and then connect the other hose to the hot water inlet. You can get these at Home Depot. Happy to help, Tim.

If you are still looking for a manual I have one I could copy to you. Let me know if you still have a need. Regards, Mike

Read your user manual - but I would suggest that you may not have setup the balance properly. Check the level of the machine and adjust to be as square as possible by adjusting the feet at the bottom. If the water isnt coming in on both hot and cold sounds like a common problem - perhaps the water level sensor is playing up or something else has been knocked during transportation of the machine when you moved house. Check your user manual for troubleshooting. Sounds dumb, but check that 'delay start' isnt selected also. check both hoses filters are not blocked.

If your washer does everything but does not spin, it is your outlet filter which is blocked. Locate this and clean out, it has to work fine. Refer user's manual.