6b error what part replac fused unit or power supply

Check power supply replace fuser fuse on power supply

C-2152 is a trouble code that may be displayed on some Konica Minolta printers. This code generally indicates a problem with the printer's fusing unit, which is responsible for bonding the toner to the paper.
Possible causes for this error code include:

• A malfunctioning or damaged fusing unit
• Toner or toner waste accumulation on the fusing unit
• A faulty thermostat or temperature sensor in the fusing unit
• A problem with the power supply to the fusing unit

To troubleshoot and fix this error, you may need to perform the following steps:

1. Check the fusing unit: Inspect the fusing unit for any visible damage, debris, or toner accumulation. If necessary, clean the unit and check for any loose or damaged components.
2. Replace the fusing unit: If the fusing unit appears to be damaged or malfunctioning, it may need to be replaced.
3. Check the power supply: Make sure the printer is properly connected to a working power outlet, and check the power cord for any damage or loose connections.
4. Check the thermostat and temperature sensor: These components are responsible for regulating the temperature of the fusing unit. If they are faulty, they may cause the C-2152 error code to be displayed.

Set the maintenance unit into place, if the planetary arm does not
move smoothly, clean it. purge cam switch harness not connected correctly,correct the connection,purge cam switch broken replace the maintenance unit, gear(s) on the maintenance
unit broken paper feed motor defective replace the engine unit,
power supply PCB defective replace the power supply
PCB. Main PCB defective replace the main PCB.

Hi,

A6 error means the CIS unit is defective and needs to be replaced.

Unfortunately this can sometimes cost more to replace then the machine itself

Thank you


Regards,
Suhail

replace the fusing unit if you can find one


try this site Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi,

That error 36 - means "Head/carriage unit travel error" , if the printer is still under warranty, have it serviced. But if its out of warranty try to find any obstacles on the travel path of the head/carriage unit. If you cant find anything, it only means you need to replace some parts.

1. carriage PCB
2. head/carriage unit
3. CR encoder strip
4. carriage motor
5. main PCB
6. power supply PCB
7. maintenance unit

Yes, 50.1 refers to the fuser, and that is very easily replaceable. (no tools) However, in the 8100, you have a 75% chance that it is indeed the low volt power supply. The low volt power supply powers the fuser.

As a service approach, I always replace the fuser first because it is so easy to do and we always have them in stock.

If that does NOT clear the error, then we KNOW it is the low volt power supply. That is a very straightforward repair.

Machine error 36
**Head/carriage unit travel error***

Try to find any obstacles on the travel path of the head/carriage unit. If you cannot find, next steps are:

- Replace the carriage PCB.
- Replace the head/carriage unit.
- Replace the CR encoder strip.
- Replace the carriage motor.
- Replace the main PCB.
- Replace the power supply PCB.
- Replace the maintenance unit.

6B is a self diagnostic issue. it seems the power supply may have just bit the dust. 

Rick and Felix are discussing the fuser, not the fuse error you are getting with the your printer. The error relates to a small fuse that is on the toner cartridge which goes into the printer. I am having a similar error message after getting a replacement from Cartridge World (although this is not the first Cartridge World replacement for this printer).

After much research, one suggestion was to remove the cartridge fuse and reinsert the toner cartridge. That worked for me and the CFU Fuse Error message disappeared for me, but I am trying to find out the PURPOSE of having a fuse on the toner cartridge itself. To protect the toner cartridge? Protect the printer? Other?