Question about Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television

1 Answer

Tv problem Well I hope this can help me out. I have wd-62725 dlp set and I turned the tv on tonight to see "flicker" on all inputs. I can still see the picture but it has some type of interference in the picture. When I turned off my surround sound of which I amm using vide switching, cleared up the problem for about thirty minutes but now i am back to the same. I power cycled the Tv but to no evail. I am a tv salesman by trade for the past 12 years and I can't think of aresolution rather than buying a new tv because of the ridiculous parts and repair costs! Any help is greatly appreciated!

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 103 Answers

The bad news,I have had to replace countless color wheels on these units.The good news,That part is avail. separately and isn't to hard to put in.

Posted on Mar 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My picture on my WD-65638 mitsubish dlp tv has a slight flicker that is annoying. Is my tv messed up?

There are a number of reasons this could happen and unfortunately not much that you can solve. If you have a backlight control in the menu you could try turning this down to see if the problem is reduced or cleared. This won't help you but the info may help a tech.

Feb 06, 2018 | Mitsubishi WD-65638 65" DLP HDTV

1 Answer

Blinking green light, but tv won't come on


If your Mitsubishi WD-62725 Rear Projection TV is stuck to green blinking LED light of death, then this is an indication that the DM hasn't booted up. There's a repair kit for this kind of symptoms. It includes parts that are known to be faulty, detailed instructions that will guide you how to do the repair. Click it HERE for the repair kit's link.

Your TV is a V26 chassis. When you are on the link, you can see 2 version of V26 DLP DM repair kit. One is an upgraded version of the capacitor and the other one is the original capacitance and voltage in radial packaged. Its up to you to decide whether you will go upgrade or not.

Hope I helped you.
Have a nice day!


Dec 20, 2011 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

My Mitsubishi WD-62725 dlp powers up , no blinking lights, the screen on all inputs is blue with streaking horiz lines and snowball in center screen. Menu works, tuner seams to work but screen goes black...

Call Encompass Parts 1800-638-3328 or look them up online they list your TV as well as Service Manual and Keep in Mind just because Light Engine was replaced 3 months ago does not mean it cannot be same Problem so if you have any warranty on it replace it again!

Nov 18, 2009 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

New bulb/TV still shuts down

Its far more likely the result of the power pwb capacitors that have failed. As the 34 code will appear if the capacitors fail on the Power PWB. You can get the V26 DLP Power repair kit at the following link.with free instructions

Apr 30, 2009 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

DLP picture problem

no way to test it other than install it in a known working set unfortunately. What seems to be your problem with the mitsubishi?

Apr 22, 2008 | Mitsubishi WD-62725 62" Rear Projection...

2 Answers

WD-62725 Need to reset to start

Good Day;

When TV will not turn on press the menu & input buttons on TV's panel, hold for 5 seconds. Count the blinks, eg; blinks 2 then pauses then blinks again. It should do this 3 times.l With that information respond back.Or the d-board is bad.

Good Luck.

Apr 21, 2008 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

WD-62725 DLP TV Automatically Turns Off

Its usually your DM control board!!! it needs to be replaced!!!

Mar 29, 2008 | Mitsubishi WD-62725 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

74990 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides