(888) 737-1752
XBOX360 & PS3 REPAIR EXPERT SERVICE
We can...
Answer
we are looking pioneer uplir to india
Problem for Car Amplifiers
Generic problem for all Car Amplifiers
I have a 2002 corvette, the base does not...
I have a 2002 corvette, the base does not work on the Bose system....what could the problem be.
Comments:
Jul 08, 2009
- Its exactly as i stated...I have a AM-FM , CD player System in my 2002 Corvette. This is the factory installed system. I have no Tone adjustment for BASE. The knob is extended and will not work...My question ,is the problem inside the system or elsewhere and what might be required to be resolved. Thank you so much for responding. Best Regards, dougJul 22, 2009
- Hello, I wish to Thank every one for their suggestions... Aparently the previous owner or someone for unknown reasons had other wires spliced onto the maim door speakers and put on the woofers. The wires for the woofers were tucked in behind. The splices were removed, covered with heat shrink and returned to normal terminals. All works like new. So glad it was not the spaekers or Amp. Thank every one so much for taking the time to offer assistance. Best Regards, DougClarification Request
Posted by mmaudio545 on Jul 10, 2009
The problem could be in the head unit or in a speaker or one of the amplifiers . With bose it is a process of elimination because if one component is bad or is going bad the entire system will be off . A lot of times they all show the same signs . In your corvette do you have a stock sub woofer?
Posted by icyb on Jul 08, 2009
Bose in a vette?? hmm...
Best Solution
posted on Jul 12, 2009
You have 3 choices - 1. the speaker is blown, 2. the wiring is broken or disconnected, 3. No output from the amp.
If you have a VOM, an inexpensive one wil work fine, and can get the speaker connection, set the meter to 1K, hold one lead against one speaker post and tap the other post, if the woofer cone moves it's not the problem. Connect the wires back to the speaker posts and then disconnect them from the amp. Hold one probe against one wire and tap the other - if the woofer makes a sound then woofer and wires are good - take the amp to the shop or buy a new one.
If you have a VOM, an inexpensive one wil work fine, and can get the speaker connection, set the meter to 1K, hold one lead against one speaker post and tap the other post, if the woofer cone moves it's not the problem. Connect the wires back to the speaker posts and then disconnect them from the amp. Hold one probe against one wire and tap the other - if the woofer makes a sound then woofer and wires are good - take the amp to the shop or buy a new one.
Yes
No
This Problem Also Relates To:
Audiovox AXTM-600 Car Audio Amplifier
Dual 2-Channel Bridgeable MOSFET Amplifier (XPA4100) Car Audio Amplifier
Jensen XA4150 Car Audio Amplifier
Jensen A400HLX Car Audio Amplifier
Kenwood KAC-7201 Car Audio Amplifier
Kenwood KAC-8101D Car Audio Amplifier
Kenwood Excelon KAC-X521 Car Audio Amplifier
Popular Solutions for Car Amplifiers
Questions and Unsolved Problems for Car Amplifiers
Answer
looking into diesel trucks, what one is the best buy, with the least troubles
Answer
what do I need to find out radio code for Hyundia 99 excel vin# KMHUD11NPXU438829
Answer
kenwood excelon kac-x621 car audio amplifier error 03
Sponsored Links
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Car Amplifiers:
Related Products & Issues:
Top Car Amplifier Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Audio & Video Equ... Repair
