Question about Projection Televisions
My RCA DLP HDTV stop working adruptly. The power ligh blinks and sound comes out but no more picture. I tried a replacement light but that did not work. Any suggestions?
SOURCE: How do I change Part #267888
Go in through the front of the TV behind the screen. From there you remove the light engine cover which will expose the color wheel. Take out the two screws that hold the color wheel in place and disconnect the two wires. Put the new color wheel in and re-assemble your TV.
It's a very easy job, there's just a lot of screws that hold the screen to the TV so don't lose them. Also there are four clip in wire's that you will need to disconnect from the light engine cover, so make a note of were they go before you unplug them.
Posted on Jan 29, 2009
Hi, you have one of two problems, either the color wheel is going or one of the cooling fans are going, the color wheels are a very common problem in samsung dlp`s, sorry I can`t nail it to a specific part but I`d bet it`s the color wheel as they are notorious for failing in samsungs, video-tek
Posted on Mar 26, 2009
that means your lamp it is getting to the end of its life.
sometimes even if the lamp still good the TV will send you that message because that timer is closed to 5000 hours
What you can do is open the lamp door, closed again and the tv will ask you if you replaced it the lamp, and just say yes and that sign will go away
or just simple replace the lamp. 915P020010
Posted on Apr 18, 2009
Tips for a great answer:
Dec 13, 2013 | Projection Televisions
Oct 16, 2010 | Philips Magnavox 50ML8105D 50" HDTV DLP TV
Oct 14, 2009 | RCA HD50LPW175 50" HDTV
Aug 01, 2009 | RCA HD61LPW165 61" Projection HDTV
Mar 17, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV
Nov 11, 2008 | RCA HDLP50W151 50" Rear Projection HDTV
Sep 27, 2008 | RCA HD50LPW175 50" HDTV
Aug 08, 2007 | RCA HDLP50W151 50" Rear Projection HDTV
511 people viewed this question
Usually answered in minutes!