Question about D-Link AirPlus DI-524 Wireless Router

2 Answers

Port Forwarding - can't access router management

Have run cmd ipconfig, have ip as follows
IP 192.168.0.100
sub 255.255.255.0
default 192.168.0.1

can't acces the router management

Posted by on

  • 1 more comment 
  • Anonymous Jun 14, 2008

    I have 3 computers connected to the router. Just from one of them I can't reach router managment program on my browser (MSexplorer 7.0, other computers have ver 6.0). I can get in by Telnet.

    I turned off firewall, reset router. Nothing helps reaching ip 192.168.10.1



    Tnx

    Haim

  • Boban Jovanoski Aug 03, 2008

    I upgraded the firmware (english version - default was german) and it worked just fine. After I restarted the router I couldn't access it. DHCP doesent work, so I entered the ip address manualy example 192.168.0.10 gateway 192.168.0.1 after that I ping 192.168.0.1 and it is successfull, but I cant access the web interface. The status light is blinking, and WLAN is off. I did a portscan and no ports are open...Can you please give me some directions how to deal with this. Thaks in advance. Looking forward to your replay.

  • scottnew Sep 07, 2008

    I'm on a wireless shared internet with no way to access router and administrator will not open ports, trying to share files with family and torrent client can not connect.

×

Ad

2 Answers

Did that already, using the ip given from running ip config. that is the problem.

Posted on Nov 10, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 93 Answers

Normaly you can gain entry to the router
via an ip adress you would put into internet explorer
you can get the ip adress from the manual you got with the router

failing having the book then a google serach will tip up the info you need

Posted on Nov 10, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Script error


On your softphone, please do the following:
1.Click "Menu" on the top right-hand corner
2.Click "Advanced Users"
3.Click "Restart"
If your magicJack is plugged into your modem or router, unplug it from the power source, wait 30 seconds, and plug it back in.
If that does not work:
<Requires some technical understanding. Explanation below. >
Please open port 49152-65535 UDP on ALL firewalls and your router, if you have one. (Router ports can be opened via the web application applicable to your router).
Restart magicJack again by following the steps above.
How to access Web Application for router
1.Start > Run > Type in cmd > Press ENTER
2.A command prompt will open
3.Type ipconfig > press ENTER
4.Make note / write down name of the default gateway and IP address
5.Open your Internet Browser
6.Type in the default gateway IP (Example: 192.168.1.1)
7.Type in Username and Password
8.Find "Port Forwarding" and Forward Port 49152-65535 UDP for the IP address you located earlier.

Apr 20, 2014 | magicjack.com

1 Answer

Magic jack error 3


On your softphone, please do the following:
1.Click "Menu" on the top right-hand corner
2.Click "Advanced Users"
3.Click "Restart"
If your magicJack is plugged into your modem or router, unplug it from the power source, wait 30 seconds, and plug it back in.
If that does not work:
<Requires some technical understanding. Explanation below. >
Please open port 49152-65535 UDP on ALL firewalls and your router, if you have one. (Router ports can be opened via the web
application applicable to your router).
Restart magicJack again by following the steps above.
How to access Web Application for router
1.Start > Run > Type in cmd > Press ENTER
2.A command prompt will open
3.Type ipconfig > press ENTER
4.Make note / write down name of the default gateway and IP address
5.Open your Internet Browser
6.Type in the default gateway IP (Example: 192.168.1.1)
7.Type in Username and Password
8.Find "Port Forwarding" and Forward Port 49152-65535 UDP for the IP address you located earlier.

Mar 02, 2013 | magicjack.com

3 Answers

Whte is my ip addres


Open a command line (e.g. run CMD to get a 'dos' prompt) and execute:
IPCONFIG

The line with IPv4 will have your IP address

Sep 20, 2011 | Linksys Wireless-G Broadband Router

1 Answer

I got a Motorola wired modem and it dosn't let me play xbox live why?


you may have to open a port that you xbox can use to connect to xbox live
    • 1 Connect only your Xbox and computer to the Internet. Disconnect all other devices. This is done to easily determine the Xbox's IP address, which is used in the Port Forwarding process.
    • 2 Open the Windows Command Prompt from the Start Menu. Click "Start > Run...," then type in "cmd" and hit "OK."
    • 3 Enter "ipconfig" n the command prompt. A list of IP addresses pop ups. Write down the IP address of your computer.
    • 4 Open your router setup utility through a web browser. Use the given directions from your router manufacturer to do so. Generally, the configuration page is opened by inputting the router IP address into the URL in the following format: http://123.456.7.8/ (where the IP Address number is unique to the router manufacturer).
    • 5 Open the "DCHP Client List" section of the router setup utility. This lists the devices currently connected to the Internet through the router, which is your computer and Xbox. Write down your Xbox's IP address (in this case, the one that is not your computer's IP address).
    • 6 Navigate to the "Virtual Servers" or "Port Forwarding" menu in your router setup utility. Most manufacturers have a side menu on their router setup utility, which is generally a section under your "Firewall" settings.
    • 7 Input the following port numbers and your Xbox's IP address into your router's port forwarding configuration:
      TCP 80
      UDP 88
      UDP 3074
      TCP 3074
      UDP 53
      TCP 53
      Placing these numbers in the port forwarding menu opens up the required ports that your Xbox needs to connect to the Xbox LIVE network. Save this configuration.
    • 8 Start up Xbox LIVE to check your connection. If you have no problem connecting, then you have successfully forwarded the required ports.

Jun 04, 2011 | Video Game Consoles & Games

1 Answer

How do I get my router add a new port forwarding entry - port 12345, protocol TCP. And how do I find out the IP address of my computer? Thank you for you your assistance.


To find the IP address your computer is using:

Windows XP/7
1. Click on Start > Run
2. Type cmd and hit enter
3. Type ipconfig and hit enter
4. The number on the right of IP Address is your assigned address.


To add a port forwarding entry, log into your Linksys device and try the following:

1. Click on the "Applications & Gaming" Menu
2. Input an application name (Can be anything you want)
3. Enter the desired port number [12345] in both External and Internal Ports
4. Choose the TCP protocol
5. Enter the last number of the IP Address in the box
6. Click the Enabled check box
7. Click on un7bpgedqyopdk0zbwaaaabjru5erkjggg== on the bottom

Sample of Port forwarding menu
vnplpartunolz7n6n3b9m+jnn7ml0i2nqxyrocyd25orpdehebgvt+6hh5hgnu0+edcks7p0pdwicsaoso4igridejiaikycxiwjccv4h6gesrve+m0iaaaaasuvork5cyii=

May 03, 2011 | Linksys WAG200G Router

1 Answer

I need to do port forwarding


You need to access the router setup screen if you want to do port forwarding on the router. also you need to check the IP address of the unit, or device you want to forward as well as the port service.

in accessing the router setup screen;

> open IE, on the address bar type 192.168.1.1 - username is blank and password is admin in lowercase.

> go to applications and gaming

> look for port range forwarding, input the name- any name will do

> the service port for example it is only one port service to open and that is port 80 and then you should have to put there 80 to 80 then check if tcp/udp protocol as well, check the IP address of the computer and then enable.

> to check the IP address of the computer go to start> run > cmd and hit okay > then type ipconfig check the IP address after.

hope

Jul 11, 2009 | Computers & Internet

1 Answer

Ip address for router for xbox live setup


If you have a computer hooked up to router, go to command prompt (Start - Run - cmd, then press enter), and type in ipconfig. The router's IP address will be the Default gateway address.

If no computer handy, most default router IP addresses are one of the following:
192.168.1.1
192.168.2.1
192.168.1.254

Apr 07, 2009 | Linksys EtherFast 4-Port Cable/DSL Router

1 Answer

You can't use the routers IP?


When setting up port forwarding you will bind each rule to your inhouse IP. This is the ip the router assigns each computer on your network. If DCHP is enabled and you have only 1 computer on the router the computers ip may well be 192.168.1.100. You can obtain your machines ip by opening Run. type cmd and hit enter. When the command prompt window opens type. ipconfig /all. The ip you find there is the ip you will need to bind your rules to.

Mar 24, 2009 | Linksys Wireless-G WRT54G Router...

1 Answer

No access to texas holdem poker game on our computer.


You need to set up "Port Forwarding" on the router. 9339 is the port you said you needed open.

http://192.168.1.1
This will prompt you for your router password. Default password is a blank username and a password of "admin".

Once you are into the configuration menus click on the "Application and Gaming" tab. This is where you add permissions to use port forwarding.

In a nutshell, pick the port you want open in the "start" and "end" fields. Leave the protocol at "both". Enter the last 3 digits of your "computer's" IP Address and select the "enable" check box.

To find your "computer's" IP, open up a cmd prompt by;
XP: Windows Icon (bottom left of desktop) and select "run". Type in "cmd" (without "'s) and hit enter.
Vista: Windows Icon (bottom left of desktop) and type "cmd" into the search bar then hit enter.

Once you have a cmd screen open type type the following minus the "'s.
"ipconfig"
Look for an entry that looks like 192.168.1.100, it will be labeled as IP** Address. The last 3 numbers of that address are what you want to enter in to the port forwarding configs.

After you are all done, click on "save settings" and that program should now have unrestricted internet access.

Dec 28, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Cant find my Router ip to do Port forwarding


click on start and click on run
on run open box type in cmd and hit enter
black window will open, type in ipconfig then click on enter then look for the default gateway address, that;s the ip of your router

dont 4get to rate solution

Apr 09, 2008 | Lucent DSLPipe Bridge/Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

1,415 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...