Question about Eureka 4467AV Upright Vacuum

1 Answer

Motor replacement for upright Eureka 4467av

Where can I buy a replacement motor for my upright Eureka 4467av ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers
Re: Motor replacement for upright Eureka 4467av

Part # is 60261-11, but Eureka has it No Longer Available. But check with a vacuum repair shop, they should be able to order one for you, but they cost around $80 or so.

Posted on Feb 06, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The carpet brush isn't spinning

remove the bottom plate and replace the belt

Mar 06, 2010 | Eureka 4467AV Upright Vacuum

1 Answer

How do you change a motor for a eureka model 8851

All of these vacuums capture the motor assembly between two plastic case halves, or are held in place by a band. Take out the phillips screws (sometimes the screws are under decorative plugs to hide them) and carefully pull one half off. You'll have a lot of taking apart to do, but if you actually got a replacement motor, it will be worth it.

Nov 25, 2009 | Eureka Capture Upright Vacuum Vacuum

1 Answer

Need a new motor

depends how old it is .if its quit a few years ol i would buy a new one.some of those oplder whirlwinds ar hard to find parts for and some are just not available anymore

Apr 20, 2009 | Eureka Whirlwind 4388 Bagless Upright...

1 Answer

My wife's Eureka 5855 Boss Bagless Wide Track stopped running

its probably something in the motor. you may have to replace the motor which could cost around $50.

Apr 15, 2009 | Eureka 5849A Boss Bagless Upright Cyclonic...

1 Answer

Eureka 5841 upright vacuum cleaner quits running, it takes a very long time before it will start again

The motor is running hot and causing a emergency shutdown. It is either clogged somewere or the motor is bad check for cloggs first then if none are present you will have to replace the motor. Depending on the original price of the machine if the motor is bad you may be better off buying a new machine.

Apr 13, 2009 | Eureka 5841 Upright Vacuum

1 Answer

Eureka Wide Track Superlite vacuum roller brush motor

Don't know if you can find something that will work, Eureka doesn't make these motors available thru them. Try some local shops or a place that sells small motors.

Jun 14, 2008 | Eureka 431A Optima Bagless Upright Vacuum

1 Answer

Motor Filter Has Been Sucked In - Eureka 4467AV Upright Vacuum

you will have to remove the cover over the motor so you can get to it and the fan. When you get the filter out, drill holes first, then drive a couple of nails down thru where the filter sits so it can't get sucked into the fan again.

Jun 02, 2008 | Eureka 4467AV Upright Vacuum

1 Answer

Eureka 4467AV Upright Vacuum > User Guide

On the top cover there are slots on both sides near the front, there is a screw on each side, take the 2 screws out and the top cover comes off, then you can get to the belt and brush roll. The belt goes over the brush roll, then over the motor shaft.


Dec 23, 2007 | Vacuums

1 Answer

Power surge issue

This is a fault in the motor, could be a shorted turn in the motor windings. This has nothing to do with fuses.

Oct 06, 2007 | Eureka 4467AV Upright Vacuum

Not finding what you are looking for?
Eureka 4467AV Upright Vacuum Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts


Level 3 Expert

18257 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides