Question about Mitsubishi WS-48613 48" Rear Projection Television

1 Answer

Akai 46DL10 rear projection TV

Lamp blew had sound no picture, replaced lamp now no power not even
at the panels at front no light comes on. Hear a faint buzzing sound

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Try unscrewing the back cover, the WHOLE thing. then look on the main board, you will see somewhere, 1 to 3 glass capsules, Which are fuses, if they are clear, take them out, an hold them up to a light, if you see a fine metal strand, then they are good, if you see parts of a strand or nothing, then they are bad, go to your nearby electronics store and purchase one. make sure it is the same one, it will have info on the metel contact part. if it is a white ceramic fuse, then go and buy one and replace it, and that shoud fix it. is not then it is a more technical problem, and may need expert repair.

good luck, ps: best stores for buying fuses is radioshack, homedepot,ect.

Posted on Nov 12, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Lamp blew, picture went then sound also. Replaced lamp, now will not turn on. Red light flashing on front switch panel.

If the red light flashing 3 times the pause and again flashing 3 times, check and make sure lamp cover is installed correctly back on tv.

Sep 05, 2011 | Sony KS 50R200A Replacement Rear...

1 Answer

Whenever i plug the unit in i hear a clicking sound from the back of the television it is for about 3 seconds and it usually takes 2-5 seconds before it starts the noise. The power light only comes on for...

Ur tv turn on now,hear alot of clicking?The tv LED light "lamp" on front panel flashes or light up?The tv projection lamp is dead.The Ballast board dead too,if hear alot of clicking?The ballast board help to ignite the projection lamp.

Jul 16, 2010 | JVC AV-56P575 56" Rear Projection...

1 Answer

No picture or sound

Hi,do you hear any strange noises? If you hear clicking or like wanting to turn on it could be the board that powers the lamp it's called the ballast.Here's the instructions to replace it : It's major symptoms are clicking,electrical sounds,shuts off and on and get the lamp indicator. But if you don't hear any strange noises,tv is around 6000 hrs,2-4 yrs,It's major symptoms are clicking,electrical sounds,shuts off and on and get the lamp indicator, it could be time to replace the lamp.The lamp you need is XL2100 you can find it here: .Have a blessed one!

May 03, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

Can't reach AKAI about replacing lamp cartridge.

its very simple small cover on back of tv remove this to replace lamp as its inside new lamp is available a just be sure to order right one check last digits on seriel number should be a J or Z that will tell you the one to order to reset lamp light push menu then enter

Feb 11, 2009 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

AKAI Rear Projection 46"TV has a blank picture with sound only


Is it a CRT or a DLP/LCD projector? If not a CRT, a worn-out projection lamp can cause this symptom. When it is a DLP projector, a faulty Colour Wheel sensor can be the additional problem. If it is a CRT projection unit the High Voltage and deflection circuit must be examined...

Please tell me more about your unit...


Jan 19, 2009 | Akai LCT2715 27 in. LCD Television

2 Answers

Mits 62525

take the lamp back out and reset the lamp

Dec 27, 2007 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Akai 46 rear projection tv 1.5 years old


Nov 10, 2007 | Mitsubishi WS-48613 48" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-48613 48" Rear Projection Television Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

74999 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides