Question about One For All URC-3021 Remote Control

2 Answers

Trying to program my DIrect TV remote to work my ILO TV

Can't find the ILO tv on the list when programming my Direct TV Remote

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Re: Trying to program my DIrect TV remote to work my ILO...

I have two tvs 1 is an Ilo and the other is a Sylvania. the code for sylvania works for both tvs on the Direct Tv Remote Hope this all helps and here is the code. 10171, there are also two other codes for this tv and they are 10054, and 10030. Have a good day and happy watching.

Posted on Jan 31, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 259 Answers
Re: Trying to program my DIrect TV remote to work my ILO...

If you were unable to find the code for your brand of TV or
component, then you can try a code search. This process may
take up to 30 minutes.
1. Turn on the TV or component.
2. Move the slide switch to the AV1, AV2 or TV position.
3. Press and hold the MUTE and SELECT keys at the same
time until the green light under the selected switch position
flashes twice and then release both keys.
4. Enter in 9-9-1 followed by one of the following 4-digits:
Satellite 0
TV 1
6. Point the remote at the TV or component and press
CHAN ��. Repeatedly press the CHAN �� until the TV or
component turns off.
Note: Every time CHAN �� is pressed the remote advances to the
next code and power is transmitted to the component
7. When the TV or component turns off, stop pressing the
CHAN �� key. Then, press and release the SELECT key.
NOTE: If the light flashes 3 times before the TV or component
responds, then you've cycled through all codes and unfortunately
the code you need is not available. You must use the remote that
came with your TV or component.

Here is the link to your manual:

Posted on Dec 12, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Code for programming remote urc-4220 to ilo 26HD

Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.

Aug 10, 2014 | One For All URC-3021 Remote Control

1 Answer

Program codes

287,288,283 are the codes to check with Ilo. Check these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given. Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Oct 26, 2013 | Universal Remote Control FX1 Remote...

2 Answers

My remote was working fine until i moved. I have Direct Tv and the remote from Direct Tv works on guide. I bought a new remote from Magnavox but it doesn't work my tv. what should I try? '

You have to program the remote control to synchronize with TV. If you wish to get moredetails; codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Mar 17, 2013 | Remote Controls

1 Answer

Remote doesn't have codes for my tv

neither of these products is listed in the master codes list.I suspect these are rebadged cheapies to walomart. you might have to contact them to find out who they really are before being badged.

Sep 23, 2009 | Remote Controls

1 Answer

RCA RCR412b remote

Direct Code Entry
To program your universal remote to control your components using the
Direct Code Entry Method, follow the steps below.
1. Manually turn on the component you
want the remote to control (TV, VCR,
DVD, satellite receiver or cable box).
2. Locate the enclosed Code Lists. Find the
list for the component you wish to
program. Find your component’s brand.
You will see a listing of four-digit codes
for each brand. If your brand isn’t listed,
use one of the Code Search methods to
program the remote control. (Refer to
pages 7-8 for Manual and Auto Code
Search methods.)
3. Press and hold the component key (TV,
DVD, VCR·AUX, SAT·CBL) you wish to
program. (To program the VCR·AUX key
to control a component other than a VCR,
see page 7.) The illuminated ON·OFF key
turns on and remains on. If you release
the component key any time during the
Direct Code Entry procedure, the
illuminated ON·OFF key blinks four
times, and the process is exited. The last
programmed code under the component
key is retained. Toshiba codes:2011, 2029, 2030, 2033, 2093, 2107, 2110, 2111, 2112

Sep 13, 2009 | Remote Controls

1 Answer

Program remote for direct tv receiver

Not a problem - here's a site that was built just for that problem.
Simply scroll down through the list of remotes and locate the remote. Then click on the link to find a host of codes and procedures to program that remote for almost any device it's capable of operating.
Hope this helps!

Dec 04, 2008 | Frigidaire Control

2 Answers

I need a remote code for a hitachi tv

Here is the setup copde page I didn't see that model remote listed but many times the remote manufacturer will use the same codes.... So look at other remote codes for Hitachi and see which one works.


Jul 24, 2008 | One For All URC-3021 Remote Control

5 Answers

One for all universal remote model URC-3220 Attempting to program direct Tv receiver to remote. Need Receiver code number

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Dec 27, 2007 | One For All URC-3021 Remote Control

3 Answers

Olevia 232t remote code

Go to Best Buy and buy the DirectTV Universal Remote Control Model RC64 ($20). It will control both the Satellite Receiver and the Olevia TV (Everything on the Olevia except the A-B-C-D Guide buttons). The Remote Control User Guide lists the control codes, four for the Olevia. The codes are:

Satellite Receiver: 00392

Olevia 235-T12: 11610 (last of the four codes listed for Olevia)


Nick from Ft Myers

Dec 21, 2007 | Directed 434MHZ Remote Control

6 Answers

Direct tv codes


Sep 22, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

1,395 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66330 Answers

Cindy Wells

Level 3 Expert

4718 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides