How to reprogram a 4 digit electronic adg safe

If it has a digital keypad, that means it has an electronic magnetic solenoid lock. That means you can open it with a rare earth puck magnet

https://www.google.com/search?q=open+safe+with+puck+magnet

..

wrong site notify locksmith

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from an Volkswagen dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for a 2000 VW Beetle radio Gamma is:
1. Push simultaneous "SCAN" and "RDM" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDM" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDM" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

if its like my old woolworths one, open the door and press a red reset button on the inside of the door, close the door and dont lock, put in the 4 numbers u wish a press a A button on the keypad, or whatever ur enter button is, then lock it, then press the 4 numbers again and the A button or enter, a light should stay on and unlock :)

Kwikset's warranty covers one year electronics defects and lifetime coverage for the mechanical movement and finish.
Here is a link to it:

http://www.kwikset.com/Customer-Support/Warranty-Information.aspx

You can contact them from there for further assistance.

Good luck!

You need to change the batteries.

If you have a key right now that works, get a copy made (you might need to go to a locksmith if a hardware store doesn't have the right blank) and put it in a safe place. Safe companies will not send out keys to safes, even if they're new -- too risky.

it sounds like it has reverted to it's factory setting if you can find the hand book it should be in there

What brand of a safe is it?? It should retain the code...