Question about Jenn-Air JCD2389G Side by Side Refrigerator

1 Answer

I replaced the water filter but the light on the door still is light saying replace filter how do i reset it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 788 Answers

Simply press and hold the light and lock buttons, on the dispenser, for about three (3) seconds, until the change filter light blinks.

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate this post with the highest rating, then please comment to this post and I will try to help you further.

Posted on Jul 04, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to reset a maytag plus fridge

I have a Maytag Plus Refrigerator and the way to rest the water filter light is to simultaneosly hold down the "Light" and "Lock" pads until the "Change Filter" light blinks (approximately 3 seconds). This will reset the Change filter light for 12 months or for the number of gallon threshold for your filter.

Posted on Dec 15, 2008

  • 2 Answers

SOURCE: Water Filter Indicator Light on Maytag side by side

Hold light and lock until change filter light blinks

Posted on Feb 11, 2009

  • 1 Answer

SOURCE: how do you reset the change filter light , have replaced filter

Question:
I have replaced filter but how do you reset change filter light?
Have replaced the filter. The light is still red. Answer: After changing the water filter, press Cubed and Crushed buttons simultaneously and hold 3 seconds.

Posted on Apr 09, 2009

  • 198 Answers

SOURCE: have replaced the water filter - how do i

Press and hold the "Reset Filter" button until the indicator lights go off if your model refrigerator has a "Reset Filter" button on the control panel.

  • Step 4 Hold the "Lock" and "Light" buttons on the control panel until the filter indicator lights turn off if your model refrigerator does not have a "Reset Filter" button. For models that do not have a "Light" button, press and hold the "Lock" and "Water" buttons.
  • Posted on May 18, 2010

    allbrands
    • 600 Answers

    SOURCE: How do i reset the

    Hello, Thank You for using FixYa. I will be helping you today.Hold the light and lock buttons together untill light resets;
    Thank You and please ACCEPT my answer and Rate my answer if it was helpful..

    Posted on Jul 02, 2011

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    After replacing filter, how long before filter light goes off?


    Filter indicator : The filter Indicator will be Red when you have used your water filter for 6 months, Reset the indicator (it will be Blue) after replacing the filter by holding the "Alarm/Hold 3 sec for Filter Reset" button for 3 seconds.

    The above is how to reset the indicator

    Jan 22, 2016 | Samsung RF4267HARS 27 cu.ft. French Door...

    1 Answer

    Filter light on


    Water Filter Status Light and Filter Reset
    The filter reset control allows you to restart the water filter status
    tracking feature each time you replace the water filter. See "Water
    Filtration System."
    After changing the water filter, reset the status light. Press the
    OPTIONS button to enter Options mode, then press LOCK to
    initiate the reset, then press MEASURED FILL to confirm that
    you want to reset the status light. When the system is reset,
    the "Order" and "Replace" icons will disappear from the
    display screen.
    These instructions can be found in the=> GZ25FSRXYY2 User Manual . As for the dispenser and ice dispenser problem this could be related to a loose connection in the door where wiring attaches to control panel and/or where door wires go from door to cabinet also a defective pressure switch where glass is pressed to get water or ice. Can you tell me when this additional problem began?
    I am here should you need me, Thanks John Tripp Appliance 911

    Apr 21, 2014 | Whirlpool Refrigerators

    1 Answer

    We have a Kenmore Refridgerator in our rental apartment. The light for the water filter went to red. We called the landlord but they claimed that they replaced it 3 months ago. They suggested we hit the...


    recommended replacment time is 3 months and the computer knows it was replaced 3 months ago and has counted down the time the reset button was last pressed and determined its been 3 months. Depending on water quality in your region it may not need to be replaced unless the in door water or ice taste funny or the water dispenses slowly through the door because the filter was clogged and having a hard time having water pass through it.

    Aug 17, 2011 | Kenmore Side by Side Refrigerator

    1 Answer

    Changed water filter and bushed lock & water buttons, red light went off but green light and other indicator lights (crushed ice, cubes, night light) did not work. Removed new filter & put . .back...


    Below are instructions to reset water filter light. Thanks, Sea Breeze
    If helpful please rate.

    Reset Filter (select models)

    When a water filter has been installed in the

    refrigerator, the yellow Order light will illuminate when

    90 percent of the volume of water for which the filter is

    rated has passed through the filter OR 11 months have

    elapsed since the filter has been installed.

    The red Replace light will illuminate when the rated

    volume of water has passed through the filter OR 12

    months have elapsed since the filter was installed. A

    new filter should be installed immediately when the

    Replace light is illuminated.

    After replacing the filter, press and hold the Reset

    Filter pad for three seconds. The Order and Replace

    lights will go off.

    Vacation Mode

    The Vacation Mode feature causes the freezer

    to defrost less frequently, conserving energy. The

    Vacation Mode indicator light will illuminate when the

    feature is activated. To deactivate, press the Vacation

    Mode pad again OR open either door. The indicator

    light will go off.
    Temp Alarm

    Apr 22, 2011 | Amana 22.6 cu. ft. Side-By-Side...

    1 Answer

    How do I change the water filter


    Removing and replacing a water filter - upper right hand corner location

    Filters situated in the upper right hand corner of the refrigerator compartment of Maytag-built side-by-side refrigerators are relatively simple to replace. Follow these steps:
    • These eight inch long filters are housed in their own compartment. The base of the compartment can be released by pushing in on the release clip found at the end of the housing unit. Allow the base of the housing compartment to hang down while you remove and replace your filter.


    • Twist the spent filter to the left (counter-clockwise) and gently pull on it to remove it. There is an automatic water shut off to keep leaks and spills to a minimum.


    • Remove the new filter from its packaging. Remove the plastic wrap, and peel off the aluminum topping. Insert the new filter into the housing unit. Twist the filter to the right (clockwise) until it clicks into place. Replace the base of the filter housing by cliping it back in place.


    • Condition the filter by dispensing several glasses of water through your refrigerator. This ensures that all fine carbon particles have been removed.


    • Check the filter and the inside of the refrigerator for leaks. If you find a leak, remove and install the filter again.


    • Finally, reset the 'change filter' indicator light, if your refrigerator has one, at the front of your refrigerator. The procedure for resetting the change filter indicator light can vary from fridge to fridge. Typically, the indicator light can be reset by holding down on the 'lock' button and the 'water' button simultaneously for three seconds. Sometimes, it is the 'lock' and the 'light' button you need to press down on simultaneously for three seconds in order to reset the filter indicator light.


    Removing and replacing a water filter - center ceiling location

    Filters situated in the center ceiling of the refrigerator compartment of Maytag-built side-by-side refrigerators are relatively simple to replace. Follow these steps:
    • Turn the filter a quarter turn to the left, in a counter-clockwise motion. The 'unlocked' symbol on the filter will be lined up with the indicator line that is molded into the refrigerator just above the filter. Allow the ears of the cartridge to disengage from the filter holder.


    • Gently pull down on the filter, being careful to not spill any water still in the filter. Discard the used filter.


    • Remove the new filter from its packaging. Remove and discard the red plastic cap found on the top of the new filter.


    • Apply the appropriate month sticker to the filter to remind your self to remove and replace the filter in six months' time.


    • Insert the new filter into the filter opening. Line the 'unlock' symbol on the filter up with the indicator line that is molded into the refrigerator above the filter. Turn the filter a quarter turn to the right, in a clockwise motion. You will be able to feel the filter stop when it is all the way in, and the 'locked' symbol on the filter will now be lined up with the indicator line above the filter.


    • Close the refrigerator door and dispense several glasses of water through the water dispenser in the door in order to purge the new filter of any impurities. Open the refrigerator door again and check for leaks. If you find a leak, remove and replace the new filter again.


    • Finally, reset the 'change filter' indicator light, if your refrigerator has one, at the front of your refrigerator. The procedure for resetting the change filter indicator light can vary from fridge to fridge. Typically, the indicator light can be reset by holding down on the 'lock' button and the 'water' button simultaneously for three seconds. Sometimes, it is the 'lock' and the 'light' button you need to press down on simultaneously for three seconds in order to reset the filter indicator light.


    Nov 29, 2010 | Maytag MFI2568AES Stainless Steel Bottom...

    1 Answer

    Reset change filter light


    Push the button in, that you will see, when you open your refrigerator door, hold it for about 10 sec. then let it go, it will turn green, If the light comes on, an says you need a new filter. That is not always true. do the same thing befor buying a new filter, to make sure you need a new filter.

    Jul 03, 2010 | Maytag MSD2758GEB Side by Side...

    1 Answer

    I am replacing the water filter how do I reset on the outside door


    The Water Filter Status Indicator Light serves as a
    reminder to replace the water filter. A green light
    indicates that the filter is in good condition. A red light
    indicates the filter should be changed. Once light turns
    red, it will remain red until function is reset.
    To Reset Indicator:
    • Press and hold both the Lock and Water
    buttons simultaneously for four seconds. The
    green filter status indicator light will flash
    three times when the function has
    successfully reset.
    Thanks, Sea Breeze

    May 17, 2010 | Jenn-Air JCD2295HES Side by Side...

    1 Answer

    Water filter light won't reset itself


    look closely at the panel it will state which buttond to hold for 3 secs to "reset " filter light

    Jan 20, 2009 | Whirlpool 25.6 cu. ft. Side-by-Side...

    2 Answers

    Reset after water filter replacement


    Generally all you need to do is push and hold the filter reset button in for 3 to 5 seconds to reset it. However, even with the filter light on, it shouldn't stop the water flow as most of the time on most brands it is just an "idiot light" that is on either a timer based on number of days or on number of minutes the water has flowed through the water valve

    Dec 16, 2008 | Refrigerators

    Not finding what you are looking for?
    Jenn-Air JCD2389G Side by Side Refrigerator Logo

    138 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jenn-Air Refrigerators Experts

    John Tripp
    John Tripp

    Level 3 Expert

    4654 Answers

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    john h

    Level 3 Expert

    12104 Answers

    Are you a Jenn-Air Refrigerator Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...