Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

How do I fix the following problem with my Janome MC9000 sewing machine?

When I turn my machine on, after a couple of seconds I get the following error code appears on the screen: "Raise presser foot and needle bar, then turn power switch back on." This message occurs whether the presser foot and needle bar are up or down. Also, when I press the foot pedal, the needle will go down, but not come back up. Please, anyone ever have this problem, and how do I fix it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 186 Answers

Unfortunately you are probably not going to be able to fix this.
It needs a sensor adjusted (probably), or a component replaced.

Posted on Nov 26, 2014

Testimonial: "SewTechWayne, can you explain how to adjust a sensor? My husband is a very experienced electrically/mechanically (aircraft and aircraft components expert) so he should be able to adjust or repair as needed."

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 323 Answers

SOURCE: I turn on machine keeps

This machine needs to visit an authorized Janome technician.
sewman7

Posted on Jul 10, 2008

SOURCE: Janome 9000 willl not work when turned on

My Janome 9000 has always done that. I can prevent it by raising the needle when I first start the machine, getting it to sew quickly or raising the needle and letting the machine sit for a few minutes. I think my computer wants to warm up a minute. As you can see I.m not a technical person but it works for me.

Posted on Jan 08, 2008

SOURCE: Janome, memory craft 4800, sewing machine

how to delete programmed patterns and start new lettering

Posted on Jul 11, 2008

  • 19 Answers

SOURCE: says raise pressure foot and needle bar

check youre screen you will see an icon of needle you have got it in the down mode touch it it will raise it next time you sew it will be raised this is an option to have needle in fabric or raised on completion of sewing this is in your manual.
hope this helps mary h

Posted on Dec 23, 2008

  • 109 Answers

SOURCE: The sewing machine works when switched on, the foot pedalhas no c

there is a clutch operated by foot pedal. if the clutch is continuously engaged then it will run own its own. so adjust clutch lever.

Posted on Nov 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Non responsive touch screen janome mc 9000


can you not take or send the machine back, you say you just bought it?

Apr 07, 2016 | Janome Memory Craft 9000 Computerized...

2 Answers

Blank screen


time to have the machine checked to see if there is something wrong with the motherboard..

May 27, 2013 | Janome Memory Craft 9000 Computerized...

2 Answers

Janome 9000 motherboard fault?


I would suggest to get another option, those motherboards are
expensive

Sep 26, 2012 | Janome Memory Craft 9000 Computerized...

1 Answer

Janome mc9000 sensor


try typing in your browser sewing machine shops in lancashire area.
the sewing machine shop should be able to order the part & put it in the machine

Apr 30, 2012 | Janome Memory Craft 9000 Computerized...

3 Answers

Touch screen for MC9000


the motherboard could be going out the machine would need to be checked

Mar 15, 2012 | Janome Memory Craft 9000 Computerized...

1 Answer

Do not know how to use this machine I bought it at a auction a farm home and contents beautiful machine but no instructions for different things I now use it as a plain sewing machine


the necessary information along with some projects and learning center have been laid on in the following address click on accesseries and you would be learning about each individual accessory

http://content.janome.com/index.cfm/Machines/Retired/MC9000

cheers

Mar 28, 2011 | Janome Memory Craft 9000 Computerized...

2 Answers

Touch panel freezing after approx 5 to 10 minutes operating


Your machine is a "computer" and needs a qualified Janome repair tech.

Mar 24, 2010 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Irene Tulloch

Level 2 Expert

494 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...