Question about Jacuzzi EH0 / EH1 / EG9 Fuzion 6666 Corner Whirlpool with Right-Side Pump...
When going through the sequence of possible switch settings, the control works fine when pressing the button to select the next mode, such as low with light, high, high with light, but when the final selection is made, which should trun it off, there is a double click and the off position is skipped and it goes right into low.
Is there anything that would keep a motor running that would bypass the off setting?
Note: the pool is not up to temperature since we have discovered the heater coil needs replacing. This shouldn't matter, but I thought i'd mention it just iun case.
I take it for granted that you know when the tub is in cycle mode for water circulation, ( the tub will do this every 4 to 8 hours unless programed otherwise). If it is truly going into the low speed on the pump, the problem lies in the circuit board. The double click you hear is the relay for the pump turning off and then on again. This is a costly problem to diagnose as circuit boards start at 200.00 and go up. If it is the relay, the only way to replace one is to replace the circuit board.
Posted on Sep 19, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 21, 2014 | Jacuzzi Home
Aug 05, 2014 | Jacuzzi Home
Apr 04, 2011 | Jacuzzi Nova Whirlpool Tub H532
Nov 27, 2010 | Jacuzzi Pool & Spa
Jun 30, 2010 | Whirlpool 5' Jacuzzi Tub Bathtub Cetra...
Apr 17, 2010 | Jacuzzi - Bathtub - Alcove - Navona -...
Sep 05, 2009 | Jacuzzi Signa Whirlpool Tub B540
Feb 21, 2009 | Jacuzzi EH0 / EH1 / EG9 Fuzion 6666 Corner...
1,914 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: