due to voltage fluctuation fumes come out from the projector what might have happened? and what...
(More)
due to voltage fluctuation fumes come out from the projector what might have happened? and what would be the repairing cost?
I opened my Proxima X350 because I was having problems with the fan (mentioned by others here: green...
(More)
I opened my Proxima X350 because I was having problems with the fan (mentioned by others here: green blinking light and shut down in 30 seconds). When I opened it up, though, I accidentally knocked off the remote sensor pin. This is the piece with 10 pins (5 on each side) soldered to the board that the remote control sensor plugs into. I am going to try to resolder it on without reapplying an solder (use the existing solder on the board). Unfortunately, I don't know which orientation to solder it on. There are 2 asymmetrical holes on the bottom, but I'm not sure how to use this. I can send pictures if anyone can help me with this issue. I have not tried to turn it on after the piece came off because I've been afraid I'll toast the board. Will it fry if I try to turn it on? Best case scenario is that have to use the keypad and can't use the remote and replacing the fans work well. Thank you.
I have a Mitsubishi LVP-X300U series projector. There is a oval shaped color distortion in the...
(More)
I have a Mitsubishi LVP-X300U series projector. There is a oval shaped color distortion in the middle of my screen and it will not go away. It happened right after it overheated one time.