Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Neptune wont spin

My maytag wont spin it washes and rinses but wont go to high speed spin

Posted by on

  • 2 more comments 
  • kirstynepark Jul 03, 2009

    modle # is mlg2000aww

  • dh1200s
    dh1200s May 11, 2010

    Sorry it did not take my link on that last post. Try reposting in this Forum for some help.

  • dh1200s
    dh1200s May 11, 2010

    Looks like you have a stacked W/D I would repost your problem over in this Forum you may geta a quicker response for support. Good luck. Rich

  • dh1200s
    dh1200s May 11, 2010

    kirstynepark , You are in the FAV6800AW forum, if its that machine model I will try to help. If it's not a FAV6800AW or FAV9800AW and you receive no response in this forum try a machine specific forum or general forum. Just post with your machine model number and serial number. Having that info may trigger a faster response for help. Rich

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 335 Answers

Looks like I may have to post this as a solution to get the link to you. I never tried to put a link in a clarification request.

Click on this Forum. If that doesn’t work here is the link to paste in your browser.

http://www.fixya.com/support/p46844-maytag_neptune_mlg2000a_front_load

Posted on Jul 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

GE GFWN1100LWW. Can the high speed spin work on the lower wash cycles?


From my experience, the lower wash cycles are set to only do certain things. For example: the Delicate won't do a high speed spin, even though a high speed spin wouldn't really be destructive to delicates, but would force more water out of them! I usually just run a "Drain/Spin" after the Delicate cycle.

Nov 27, 2015 | GE Washing Machines

1 Answer

My machine wont run, i replaced the drain pump and thermostat sensor.


Depending on your model pushing soil level and spin speed at the same time then hitting the power button will start it in diagnostic mode from here out pushing start will check its features, door lock, low spin, high spin, pre wash, wash, bleach, softener, rinse, drain, spin...ext

Jun 01, 2014 | LG WM2688HWM TROMM SteamWasher

1 Answer

Commercial maytag front loader starts high spin when money is put in


It's A You Drain Pump is bad. What a guy! He did not know that!? Replace the drain Pump and it will a Happy washer again!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Jan 19, 2014 | Maytag Washing Machines

1 Answer

Front loader will spin in spin cycle but wont spin at high rpm needed to rinse water out of clothes


Possible that the controller is not shifting to switch on the high speed mode. Try and check if you can get this to work manually, try with another program on the panel. If so the fault is with the controller.

Jan 15, 2013 | Kenmore Elite 45986 Front Load Washer

1 Answer

MY MACHINE WONT SPIN


Check the voltage to the motor when the program goes to the spin cycle. If there is voltage then check for free movement and also check on the capacitor to the motor. In some cases the high speed coil winding to the motor for the high RPM spin cycle can be faulty.

Mar 13, 2012 | Washing Machines

1 Answer

My wf310 1100 spin will not do a high speed spin


hi, there may be not enough water draining out on the last cycle before it spins so i'd give the pump a good luck over also check the filter if it has 1, and check the drain hose. the other fault could be the module control board this controls the motor speed hope it helps

regards
shaun

Nov 27, 2011 | Washing Machines

1 Answer

Maytag MHWE450 spins fine at full speed mid-cycle, for instance between wash and rinse, but will not spin after rinse or on "drain and spin" option. There are no error codes. Seems it might be...


Hello K.W. ,
Sad to sad their is no way to reset the control and yes it sounds as if has diagnosed it spot on ...since it spins on the rinse cycle the motor can be ruled out totally as the problem since its up to the control to tell the motor what to do and when to do it so if it spins sometimes and not others it seems to be the control that's not telling it to spin at the end. One thing to check though is that the filter screen perhaps is clogged since i believe it doesn't spin at high speed until after the water has drained and if the filter on the pump is built up w/debris its not going to drain fast enough so while it may not solve it,it may solve it by checking the drain filter. This tip i wrote will show ya how to check the filter on the pump.http://www1.fixya.com/support/r10121384-check_when_duet_washer_door_locked_after

If the filter is relativity clean and doesn't solve the problem the control baord would need to be replaced.

Sep 27, 2011 | Maytag MHWE450W Washer

1 Answer

OK during wash and rinse cycle but suddenly became very noisy during high speed spin cycle


If noise occurs only during spinning cycle, then the 2 bearings and seal need to be replaced.

May 23, 2010 | Maytag Neptune Washer

1 Answer

I own a Maytag Performa 4 Speed/24 cycle Washing machine. it is 4 years old. Problem: A very LOUD grinding sound when washer engages into wash, rinse, spin cycles. The Tub does agitate - but I don't...


sounds like you have a tub seal problem, which took out the bearings, I take it one buzy mom does lots of laundry! Maybe time for a new washer.

Jul 11, 2008 | Maytag Washing Machines

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...