Question about Toshiba REGZA 52RV530U LCD TV

1 Answer

Neither the remote or power on/off switch works to turn on

Can not turn tv on or off. The remote or the tv power switch do not work.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 132 Answers

I'm assuming you tv doesn't turn on but you have the red light indicating power , it's possible you have more than a faulty switch , common fault is the power board has blown one or a few capacitors , you could try replacing the power board on the tv but some tvs will not start if there are other faults , namely faulty inverter , faulty power board , if the display is faulty , it'll be cheaper to buy a new tv

Posted on Sep 19, 2014

Testimonial: "You misunderstood I have no light or no use of the power button on the tv or use of the remote. I believe this means I'm not getting power to the tv. What if I disconnect the eye and mount a small toggle switch giving me direct power to the tv. Of course properly insulated ."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an emish tv box the remote switches it off and on if I press it after about 5 seconds. But if I switch it off with the remote i have to use switch on back of box to switch back on


DIRECTV - Support: Your Remote Control

www.directv.com/DTVAPP/equipment/demoInfo.jsp?assetId...

DIRECTVTrying to get your DIRECTV remote control to work with other devices? ... TV Power On & Off - If your receiver turns off while the TV turns on, press TV Power On ...

Program the remote for your TV - Fiber Help

support.google.com > ... > About the remote control

GoogleThe Google Fiber remote control is not designed to fully control external audio equipment. ... Press and hold the button on the original TV remote that you want to program on the Google Fiber remote. If the learning works, the TV power button on the Google Fiber remote blinks twice ...

Dec 26, 2015 | Televison & Video

1 Answer

Green light stays on when trying to turn off tv. picture go's off when cable remote is used but green light stays onand you can see that screen is still on?


You need to set up the cable box remote for your TV , now you are just turning off the cable box. Some cable boxes have a switched plug on the back that will turn on and off with the box. If yours has the switched receptacle you can use that to turn the TV on and off by plugging your TV into the switched receptacle. Make sure the TV power is on, the receptacle will kill the power so the clock on the TV wont work. Otherwise you need to set the code for your TVs remote and use the system power button.

Apr 23, 2014 | Mitsubishi LT-46153 LCD TV

1 Answer

Sharp tv 25g s100 power button doesn't work, no original remote


The remote may or may not be the real problem, it is possible on most of these to gain access with back removed directly to the tiny button switch that is in back of the plastic power button on the set and press it with something not sharp (a micro switch is what the button activates) and if set comes on get the remote programmed.

Your best bet if the set will make it on that way is to get the original remote----if in North America with the model number of the set contact either Sharp or Andrews Electronics---usually the original is under 35 dollars and no headaches with programming.

If set does not turn on manually with the micro button you may now have a actual circuit problem in the set.

Dec 10, 2012 | Televison & Video

1 Answer

I turned tv off with remote, now it will not turn back on. i have tried remote and button on front of tv.


Check the remote with new batteries. If it do not work, remote control has the trouble. You can't switch the set ON by its front panel power switch, as it has been shut down by remote command.

Mar 31, 2012 | Symphonic WF20D4 TV

1 Answer

My directv remote will no longer work t v re programmed it for another tv and works fine the orgial remote will not work either funny thing this happened today after replacing old batteries


10 Steps to Program Your Directv Remote

1. Turn on television.

2. Locate the switch at the top of your remote that allows you to toggle between receiver, auxilary, and TV modes. Slide switch over to"TV".

3. Hold down MUTE and SELECT until a small green light at the top of the switch blinks twice.

4. Enter code 9911.

5. Press and release the CHANNEL UP button repeatedly until television turns off.

6. When TV turns off, press SELECT.

7. Next, press the power button. This should turn the TV back on.

8. With television on, press and hold down MUTE and SELECT again until the small light blinks twice (same as in step 3).

9. Entercode 960.

10. Slide switch back over to "DTV". Your remote is now ready to use!

Nov 01, 2010 | Westinghouse SK-32H240S Television

1 Answer

Sometimes the on/off switch doesn't work and we haven't been able to program the DirecTV remote to turn the TV on and off. We did discover that the original Toshiba TV remote will turn the TV off and on....


Could have a bad power switch or a bad ground on the switch itself. Will the original remote work to on and off the tv every time? If not you may a bad filter cap or two near the horizontal deflection.

Oct 10, 2009 | Toshiba 32D46 32" TV

1 Answer

I have a toshiba tv with a broken power button


Generally the power button has to be on first to put the TV in standby mode. If you cant do this no remote can ever work. Remotes are not capable of turning on a set that has no power mechanically turned off. and that is what the master switch does. once that standby light is off it is not live and consuming power and not under the control of a remote anymore

please rate our help++++Y=Thanks for using FIXYA

Sep 25, 2009 | Sharp 27N-S100 27" TV

1 Answer

Problems programming DVR remote to TV


If your DirecTV remote is in SAT mode and the power button isn't turning the receiver on and off, you will likely need a new remote. There isn't suppose to be any trick to getting the power button on a remote to work. However, only DirecTV tech support can confirm this. I would give them a call right away.

Jul 12, 2009 | Philips Televison & Video

2 Answers

Remote won't work and power switch pushed inside the television


No, sorry, not from this distance. But if I were actually there, I would try to put the switch back where it belonged, IF it was not broken!

May 15, 2017 | Sharp 25N-S100 25" TV

1 Answer

Toshiba rear projection tv


Will the tv power up with the power button on the TV control panel? If so its your remote sensor inside the TV. Let me know your model number.

Jan 21, 2008 | Televison & Video

Not finding what you are looking for?
Toshiba REGZA 52RV530U LCD TV Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...