I left my aucma tv on for a long time without use

LCD & LED TV Repair - No Image & Blank Black Screen ...

? 5:56
https://www.youtube.com/watch?v=xUzCLgoSPGM
Sep 15, 2014 - Uploaded by ShopJimmy.com
LED & LCD TV How to Diagnose Symptom of No Image on the ...the the tv turns on but there is no picture or sound and I can't seem to fix it the .... +tbones11234 I have the same on myHisense 55" TV,what did you ... The problem is when i turned it on it shows on the screen the sony logo three times then its ...

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA
May 8, 2014 - Uploaded by ShopJimmy.com
TV Repair Help for a TV With a Black No Image on the Screen ...Click Here to BUY TV REPAIR P... ... I Have a Hisense Tv in My Screen Is Not Working Right The brightness is ... Hi my TV shows the picture for a moment and then goes .... here the sounds but you cant see nothing and a sanyo flat screene.

My Aucma TV is displaying blurred images

time to replace the Tv unfortunately

Look through the settings and see what has got changed, if you can see the menu. If you cannot, show a flashlight on the TV (only if this is LCD TV) from a distance and see whether you can see the picture. Try resorting to factory default settings.

If you have left the earphone plugged in to the laptop for a long time, this may have bent the contacts in the socket, and stopped the speakers from working.

The only audio out jack on your TV is for the headphone on the left side of the TV. You need to purchase a 3.5 mm to RCA audio cable, connect the 3.5mm jack to the left side of your TV and the 2 RCA audio cable ends to the audio in of your Home Theater and then select AUX 1 or AUX 2 on the home theater depending on which jacks you plugged into.

The noise you are hearing is the power supply attempting to start up. Unfortunately, a component has failed inside the power supply circuit. Most likely it is a capacitor. The good news is that the set should still be under warranty and the repair should not cost you anything. The bad news, is that the service person may not have a replacement power supply board with him/her when he/she arrives. This should be a quick fix as the replacement board is relatively easy to change.

Dan

If the picture faded over time and then went out completely....you have a bad digital main board. Hope this helps.

Reset the TV. Pull the plug, wait a minute, replug it and report back.

Hi Madelin,

What is the make and model of your laptop and your operating system?

This is a problem that can be solved in 5min, so please get back to me.

"my labtop has no sound coming from it i cant hear my music or anything else.."

I don't want you to suffer anymore, life without music is dreadful!

-Daniel.