Question about JVC Cybercam GR-DVL725 Mini DV Digital Camcorder
You can't with what you've got I hate to be the bearer of bad news, but in order to play tapes in a vcr and run them through a digital camcorder for output to a computer, the camcorder must have s-video or av inputs. Your camera only has s-video or av outputs, used for sending from the camera to the vcr or tv. Also, some cameras have the inputs but don't support analog to digital pass-through (which is what you are describing). With these cameras you input from the vcr and record it to the tape in the camera, and then output it to the computer. Without the inputs, you can't do either one.
Posted on Sep 05, 2005
1. Using the A/V Cables provided, connect the proper end of the cable to the Camcorder where labeled A/V Jack 2. Connect the other end to the A/V inputs on the VCR. (Location of A/V jacks may vary by model) 3. You must activate the video mode on your VCR. Look for a button labeled: TV/VIDEO, INPUT, SOURCE, LINE IN, LINE 1, etc. (For more information, consult the User Manual for the VCR.) 4. Once you are able to view the camcorder playback on your television, press Record on the VCR and play on the Camcorder.
Posted on Sep 06, 2005
SOURCE: BURN HOME VIDEO TO DVD
Assuming that your camera is not equipped to interface directly with your PC, here are the steps to take to get your videos from VHS to DVD:
- Purchase a video capture device.
A cursory websearch garnered once for $50.00 here:
ADS Tech Video Xpress
- After setting the device up, use the bundled software to convert the video file into DVD format and then burn to disc, using your favorite burnig software. Be sure that it is burning in the VIDEO_TS/AUDIO_TS format and not just copying the .avi to the DVD.
If you would like for me to elaborate on anyt of these instructions, please don't hesitate to contact me directly at email@example.com. Good luck and, again, let me know if there's anything else I can do. I think you'll be just fine though as this process is fairly straightforward...just time-consuming.
Posted on Nov 27, 2007
install first the bundled software with your camera turned on and plugged in to your pc and then restart your pc if its necessary..
Posted on Dec 27, 2007
u will need the software form website latest verison ok jvc.com then driver download area for yourmodel save to hard drive then install then u can tranfer thx nick
Posted on Feb 04, 2008
Tips for a great answer:
Sep 30, 2012 | JVC GR-DV700 Mini DV Digital Camcorder
Aug 22, 2011 | JVC GR-D73E Mini DV Digital Camcorder
Sep 03, 2010 | Sony Handycam CCD-TR517 Camcorder
Mar 26, 2010 | Video Cameras
Mar 26, 2010 | JVC GR-D90U Camcorder
Aug 31, 2009 | JVC Cybercam GR-D30 Mini DV Digital...
Jan 28, 2009 | JVC GR-D770 Camcorder
Nov 27, 2007 | JVC GR-AXM17U Camcorder
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: