Question about Minolta magicolor 2200 DP Laser Printer

3 Answers

Can't get printer to work

We got the printer (2200 DL) from a friend but they did hsve the software for it. I there a way I can get the software, or can I get it to work without it?

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 143 Answers
Re: Can't get printer to work

Soulvisitor's link is actually INCORRECT, unfortunately.

The model is CLOSE, but it is NOT the correct one. The driver link he gave you is for the full-sized version of the 2200 series printer.

You have indicated that you have the 2200DL which is the DESKTOP-SIZE version. (DL = "DeskLaser".)

Click HERE for the direct link to the printer's product page.

Click HERE for a direct link to the Windows XP driver. (There are no Windows Vista drivers on their site for this model. However, there is a good chance that this XP driver installer will work in Vista as well.)

Download the driver, unzip the file and run the "setup.exe" file in the resulting folder.

A word of advice before you install the driver... UNPLUG the printer from the USB port before you install. The software may require you to do so and will eventually instruct you to plug the USB cable in during the installation process. Sometimes if you install the software while the printer is plugged in, it can cause the system to NOT be able to detect the printer. (A common issue with HP printers, for instance...)

If you need further assistance, please let me know.

Good luck.


Posted on Nov 10, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 207 Answers
Re: Can't get printer to work

The correct drivers for the MagiColor 2200 are included with Windows Vista. When the printer is detected, select "Minolta-QMS" (not "Konica Minolta") from the manufacturer list, then the specific model will appear.

If you do need complete drivers in English, contact Burkhart Technology Services (

Posted on Aug 31, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Minolta Master
  • 1,113 Answers
Re: Can't get printer to work

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Firmware magicolor 2200 DL

Sir/mam requires access to secure konicaminolta web site. If they still have it. That legacy Minolta/QMS now konicaminolta

Jan 18, 2014 | Minolta magicolor 2200 DeskLaser Printer

1 Answer

What program I need to scan files from printer iR 2200

you can use adobe /word/photoshop or any other software that supports scan input.
and u have to get the scan gear tool download first as this is a network scanner and only works in network

Jun 30, 2011 | Canon imageRUNNER 2200

2 Answers

Have the 962 and it was working now makes a long noise when trying to feed paper and says error 2200

You didn't say which operating system you are using so I guessed and searched for problems at the Dell site with Vista systems. Here are the error codes it returned:

Error 2200 is a scan carrier stall error.

If you don't use Vista, please navigate backwards from this link and choose your operating system.

Feb 22, 2010 | Dell 962 Photo All-In-One InkJet Printer

1 Answer

Stylus 2200, "print test page" in menu, unclickable.

- System Preferences
- Print & Fax
- Select Epson Stylus Photo 2200
- Open Print Queue
- In the top right corner of the Queue window click the Utility button
- Epson Printer Utility will open where you can check the levels and run cleanings and nozzle checks, etc.

May 07, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Epson 2200 going back and forth forever

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 06, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

I lost the setup disk for my lexmark 2200

Hi amimal817,

Here is an website address where you can go to get the software (drivers) for Windows XP or Windows 2000 for that all-in-one printer:

Hope that helps,

Take care,


Let me know how that works for you...

Nov 14, 2008 | Lexmark Printers & Copiers

1 Answer

What is error 2200?

i had error 2200 on my X7170 lexmark....i turned it off.uninstalled the lexmark software in uninstall/add programs in the control panel.restarted my computer.installed the software again....then worked like a charm....hope it works...peace.

Nov 19, 2007 | Lexmark P6250 All-In-One InkJet Photo...

1 Answer

Magicolor 2200 can't complete warm-up

clean the connectors of the toner cartridge, transfer unit, drum cartridge. did it signal ** toner? replace if needed. check the status of your printer install the printer utility then see the machine status you will see error codes. tell me if what is the code..

Nov 08, 2007 | Minolta magicolor 2200 DeskLaser Printer

Not finding what you are looking for?
Minolta magicolor 2200 DP Laser Printer Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers


Level 3 Expert

469 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

Are you a Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides