How do you disassemble the pool and filter

• gets lots of people
• host a barbecue
• and start dis-assembly

Of course, empty the pool first!

• Then begin by removing the top rail
  • Screws will be on the piece over the joining rails.
• then remove the ridgidizing bars
• then remove the plastic coping strips
• then lift off the liner off of the wall
  • Lay it into the pool
  • fold it, nicely into a square
• locate the bolts & nuts that join the wall
  • remove them
  • then start rolling into a roll

This is where the multitudes of people come in, during the time the ridgidizing pieces were removed, the wall is very unstable & very wobbly!!!! People need to hold it from falling over and bending the wall. Once the wall is no longer attached in an oval or circle, and started to be rolled into a roll, you will need to have the people work as a team and lift out of the bottom ridgidizing pieces and stabilize the process of rolling the wall.
Once the wall is rolled up, gather up the bottom rails and the foot pads.

Good Luck.