Question about SansuiM1315 TV

1 Answer

1999 sansui tvm1915 tv

I have a sansui tvm1915 television and i got my rca systemlink 3 remote to work with it i have 42 channels of cable but the cable only works to channel 13. I dont have the original remote that comes with the tv so i can't press a menu button or program channels. I have a menu button on my remote but it doesn't work on it. So how would i program these channels to work without using the original remote that was made for the tv. Can i use the remote i have now?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers
Re: 1999 sansui tvm1915 tv

You'll most likely need a Sansui remote made to work with your specific model TV. I have similar problems with my Toshiba TV. Check eBay.

Posted on Nov 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sansui dtv2798

use a av cable ( rca cable ) and then select the av input

Jun 22, 2013 | Standard (CRT) Televisions

1 Answer

While moving my parent's Curtis Mathes Cm19001 TV produced in 1999, I touched the channel button which took the TV off of channel 3. We've tried to use the channel buttons to return to channel 3,...

I have one of this tv model too.Just used a RCA component cables like Y,R,W hook one side to the tv Video IN INPUT holes and the VCR the other end of the cable to VCR Video OUT INPUT holes.Now just pushes a channel manual button up or down a couples for the tv go into VIDEO Mode.Play the dvd player it will work.Or try to buy a tv original remote.Return the universal remote.

Jun 18, 2011 | Curtis-Mathis CM19011 TV

1 Answer

I'm having a problem finding the right universal remote for my RCA - model #F27649. My TV was manufactured in 2002. I live in Cleveland, OH 44120 and if you can, would you give me a location where I can...

Just buy one RCA Systemlink-3 Universal remote control to operate well with your RCA tv.
The clodes lited are:

RCA 000, 181, 100, 233, 203
212, 098, 005, 003, 004, 006.
Other device codes and proceedings ot set it with TV will be listed in its usermanual alongwith it.

Apr 25, 2011 | RCA F27649 27" TV

1 Answer

My universal remote went out and somehow the tv-a Sansui-got switched from channel 3. How can I get it back to channel 3 so the converter will work? I tried changing channels manually at the tv but it...

Look in the owner's manual for instructions on having the TV scan channels. Make sure the converter is on before starting the scan. If that doesn't work, you'll have to buy or borrow a universal remote to take care of it (enter 3, 03 or 003 on the remote control). This will happen every time you remove power to the set, whether it is unplugged or you have a power failure, so start saving up for a new remote control.

Dec 07, 2010 | Sansui 27" TV

2 Answers

What channel does video player work on?

your line in or front RCA yellow/white/red cable input is usually defaulted to channel -1 and is accesible by either pressing the tv/video button on tv or remote or sometimes by scrolling down channels past 1

Mar 30, 2010 | RCA 20F424T 20" TV

1 Answer

Sansui COM3101A 13" Tv/VCR Combo Problem

You can try the codes for Orion, Emerson, and RCA. Call the number on the back of the set to see if the original remote is available.

Sep 28, 2008 | Sansui COM3101 13" TV/VCR

2 Answers

Sansui TVM1902A

Try codes for Orion.

Aug 27, 2008 | Sansui DTV2760 27" TV

1 Answer

How to switch to dvd mode

If you can provide the RCA remote model # I can be more specific (it should be located on the back or inside battery case.
Anyway depending on whether your remote uses 3 digit codes or 4 digit codes the Sansui TV code is usually 191 or 1191.
  1. Press and hold the TV button on the remote. LED will stay "ON".
  2. Enter the code for your brand of TV into the remote while continuing to hold the TV button down. LED will go out during number entry and turn back on when the last digit is entered.
  3. Release the TV button. LED will flash and go out if number is entered sucessfully, or flash 4 times if it detects an error.
  4. Press Channel up or down to see if this has worked.
You can also use the code search function.
  1. Turn on the device you wish to control.
  2. Press and hold "CODE SEARCH".
  3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
  4. Release "CODE SEARCH".
  5. Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
  6. When the device shuts off press and release ENTER.
  7. Try using the remote. If it does not function repeat steps 1 through 6.

Mar 21, 2008 | Sansui H TV2600 TV

Not finding what you are looking for?
SansuiM1315 TV Logo

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers


Level 1 Expert

13 Answers

rugby prop

Level 3 Expert

428 Answers

Are you a Sansui Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides