Question about RCA D52W19 52" Rear Projection Television

Open Question

Power problems i have a d52w17b projection tv. power light comes on when i push power button then flashes 2 times more then goes out .. there is a little buzzer noise from the rear right corner of the set every time the light comes on

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

snakehead
  • 1074 Answers

SOURCE: RCA projection televeion problem.

take your tv to a tech for repairs the tv power supply or related circuit is defected.good luck

Posted on May 14, 2007

Slinteriors
  • 8617 Answers

SOURCE: 52 RCA DLP 1080P Television with NO picture and buttons flash

IF you would like help diagnosing your set. Go to the enclosed link. They have the service manual for your set and offer unlimited chat support for only 29.99. Just click on your sets manufacturer and you will see your model. Then click on the contact us link and provide your email address and they will email your manual and instructions on how to obtain your support. I am one of their techs. This manual contains step by step procedure for troubleshooting Your RCA DLP Light Engine
http://servicemanuals.vstore.ca/

Posted on Jan 15, 2008

Slinteriors
  • 8617 Answers

SOURCE: RCA D52W14 52" rear projection tv

3 blinks means the flyback needs replacing. very easy repair. You can get a flyback at the following link for under 50.00 with free shipping and free tech support so you can install it yourself. You need flyback 259296 here is the link.
http://servicemanuals.vstore.ca/

Posted on Jun 28, 2008

  • 1 Answer

SOURCE: my 60 inch rca rear projection tv will not come on

i have had same problem repairman states splitter is bad has an upgrade for $350.00 the next time repaior man could not find part,,advised he would have to replace entire box this cost $275.00 and also states thiis would be a later model than my original box,the picture is great never been this good.note when i say box i ment the box inside tv with all the electronice and projector

Posted on Mar 27, 2009

Slinteriors
  • 8617 Answers

SOURCE: RCA 52inch HDTV (2004 model) green power light flashes 3 times

Replace the flyback 259296 and the cp150 You can get the aprts with detailed instruction on how to do the repair at the following link.
http://servicemanuals.vstore.ca/

Posted on Jun 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony HD Projection TV KDP-57WS550, timer light blinks 5 times and repeats sequence. When power button is pushed sound comes on briefly, no picture, then TV goes off. Please advise.


Mine did this after a power flash. Lights blinking 5 or 6. They blink fast lol. I have sound till tv powers back down. Front yard bond fire? Or any ideas? Thx.
10_18_2015_2_55_53_pm.jpg

Dec 25, 2010 | Sony Grand WEGA KDP-57WS550 57" Rear...

2 Answers

Power will not come on even after system reset. Pushed reset and LED flashes then after it stops flashing TV will still not turn on.


do self check: when it shuts off and power light goes off:

On front of set press and hold both menu and input (device) buttons for at least five seconds and release both buttons.

Power light will blink a two digit error code, like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know what error code and I will assist you


SD TECH

Sep 24, 2010 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

When you push the power button, the fan comes on..If you then push the lamp button, the lamp lights up then immediately goes out and the temperature indicator light goes out and the power button blinks..


it sounds like you need a new lamp, this lamps are rated 6000-8000 life hours a life span of 2-3 years of use most of the time the problem comes from the lamp in this TV sets this is the lamp you need

http://cgi.ebay.com/ORIGINAL-HITACHI-UX21511-DLP-LAMP-REPLACEMENT-BULB-OEM-/120607006394?pt=LH_DefaultDomain_0&hash=item1c14bcdeba

Sep 20, 2010 | Hitachi 60V500 60" Rear Projection...

1 Answer

I turn the power buttin on....after about five


When was the projection lamp last change?If the tv,projection lamp inside the tv at last change was 1/ 1/2 or 2 years ago,and the tv is on,an in use at lest 4 or 5 hours day.The projection lamp life,it over should be change the projection lamp.Now tv turn on LED light "LAMP" indication light up or flashes?Yes,the projection is dead,hear alot of clicking too?The Ballast board it also dead,should be change too.The Ballast board,this board job,it help to ignite the projection lamp.

Jul 23, 2010 | Toshiba TP61H60 61" Rear Projection...

1 Answer

Timer light is flashing but tv wont turn on!


When the timer light stoped flashing the remote control would not turn on the TV. The next time the light quit flashing I held the power button in on the TV for about 5 seconds and it came on and has had no problems since then with the remote or the local TV power button.

Greg Allen

Aug 29, 2008 | Mitsubishi Televison & Video

2 Answers

Won't come on


hy i got a toshiba 42" LCD tv ,when i press the power boton
iget the red light,& it stay that way ontil i pressthe power back off
thanks for any help

Jun 26, 2008 | Toshiba 62HM95 62" HDTV

1 Answer

My projection tv trys to come on but won't you push the button and the power on light comes on but goes off comes back on then goes back off 3 to 4 times then goes off for good started few days ago but if...


I need the model number of your set. And can you count exactly how many blinks the power light blinks when you press power? Please respond to this same post so all comunication will be available for each response.

Jun 26, 2008 | Televison & Video

1 Answer

Powering on my tv


Dear smmmobil,
The problem lies with the SMPS (switch mode power supply ) of your TV. The smps board needs to be replaced.

ramesh22

Jun 15, 2008 | Televison & Video

2 Answers

My big screen tv went off and reset it but you push the button and the power comes on and goes right back off


when we push power button the green light flashes as if thinking about turning on and nothing happens, any way to fix this? 

Feb 18, 2008 | Televison & Video

Not finding what you are looking for?
RCA D52W19 52" Rear Projection Television Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...