Question about Zebra Z4M Printer

1 Answer

Dimly label HI My name is Cvetan, I need help from you gays, this is my problem, Sometimes my Zebra Z400 print the label in great condition but sometimes the barcodes and all the other images on the label is damly, this sttops me seriously in my work, Can you help me Thanks and best regards!!!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 185 Answers

Hi Cvetan, could you reset the printer to it's default settings. To do this you need to access the Menu, once you have accessed the menu you need to exit it. You will be presented with Save Permanent, cycle around until you find Load Defaults and press exit, it should say loading defaults. restart the printer and see how it goes. If the print quality is too light, change the settings in the driver under Head settings. Once you send the print you printer will pickup the new settings.
I hope this helps

Posted on Oct 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My zebra z4mplus just start printing at the center of the label instead of at the left side of the label. Instead of a normal full printing on a label, now the left half of the label is blank, and the...


Welcome to FixYa.
The Zerba Driver might have been corrupted.
Uninstall the Zebra Driver/Software from the Control Panel.Re-install the Zebra driver using the Disc that came along with the printer.
Thank you for using FixYa.Have a great day.

Nov 29, 2011 | Zebra Z4Mplus Label Printer

2 Answers

ZEBRA LP 2844 PRINTING PROBLEM IN USPS SHIPPING ASSISTANT


Are you sure that the page size is wrong, or are you just guessing because of the way that the label is printing? I would uninstall the driver - delete the printer from printers and faxes and remove the driver from Server Properties (in the file drop down in Printers and Faxes). Go to ups.zebra.com/ctp and get the latest driver - you have to have the UPS version of the driver in order to support pass-through printing. Go into your UPS Ship Asst application and make sure that the generic thermal is not checked.

Jan 15, 2010 | Zebra Eltron LP 2824 Thermal Printer

2 Answers

Zebra LP2844 print is wrapping horizontally


Update the printer firmware, download latest printer driver from zebra website.

Oct 01, 2009 | Zebra LP 2844 Thermal Printer

1 Answer

I have a Zebra Z400 and when I print a label it ends up printing way off to the left or right even though I have the printer tracking on 'centre'. The labels in use are 47mm wide 25mm long. Would there be...


Dear Sir,
I am Jitendra Gupta From JSK Netcommerce Pvt Ltd. We provide Barcode Solution and i am working as a technical support. I read your problem so according to me problem is that:-

1. Page Setting Problem:- Please take proper Page size in your software or Printer Driver.
2. Printer Driver:- it may be Printer Driver is Corrupted.
3. Software:- It may be software is corrupted and you should re-install software.

as i think all these process you will clearify you problem and further information you can feel free to contact me. my contact no is 9958217501

thanking you
Jitendra Gupta
JSK Netcommerce Pvt Ltd.
40540891/92/96

Dec 03, 2008 | Zebra 105SL Thermal Label Printer

1 Answer

Zebra tlp 2844 trouble


Verify that the ribbon fits into position, back and forth. You can also calibrate the label by pressing the button while powering up the printer and release the button.

Aug 02, 2008 | Zebra R2844-Z Label Printer

2 Answers

Zebra driver for mac


OS X 10.5.2 and above have built-in ZPL and EPL drivers. Plug the printer in to USB, go to System Preferences > Print & Fax, click + , and choose the Zebra driver. For the LP2844 you choose the EPL2 driver.

Jul 07, 2008 | Zebra Eltron TLP 2844 Thermal Label...

1 Answer

Error printer zebra 220


Recalibrate. Sometimes the LED is too strong and it will show through the paper or the sensor is damaged. People will jam screwdrivers in there to get the label out. This sensor is found where the label first goes into the rollers.

Apr 25, 2008 | Zebra Printer 140-751-00000

1 Answer

Z6M printing issue


try adjusting the presure of the printhead

here is the site for the manual

http://www.zebra.com/id/zebra/na/en/index/resource_library/manuals.results.html


good luck

Dec 12, 2007 | Zebra Z Series Z6M Thermal Label Printer

Not finding what you are looking for?
Zebra Z4M Printer Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

Dave Busselle

Level 1 Expert

54 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...