Question about Ricoh Office Equipment & Supplies

1 Answer

About Nashuatec Aficio SP 3200SF question

About Nashuatec SP 3200SF question ''After refilling the cartridge the toner low red light is still flashing. How to stop the flashing light?''... After I refill the cartridge with a appropriate toner, message Replace Toner is still showing on the display and red error light is still flashing (like it was before i refill the cartridge). I suppose this is a chip issue because if this message had been connected with some kind of toner level sensor the problem should be solved. I want to know is there some possibility to reset the chip and stop showing the Replace Toner message from display?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 313 Answers

You could try going into the sp modes and check sp 5052-1 this is for independent toner check if the toner cartridge was checked by the copier as empty and you refilled it the machines check of the chip still senses it empty by turning this off it could reset it for you .. I have had some mixed results sometimes it works only occasional failure.. Hope it helps Good Luck A

Posted on Jul 03, 2009

  • Andy Bell
    Andy Bell Jul 03, 2009

    Sorry the sp should Have been 5051-1 this is the reset my fingers are to much in hurry..goood luck

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the alert light still on to off ? after refill black toner ?


Replace the chip, or mite have a RFID chip then you need a new cartridge

Nov 18, 2015 | Ricoh Aficio Sp C222dn Color Laser Printer...

1 Answer

How inaficho sp 5200dn lock toner chip ?


this printer cartridge has an ID chip. If you want to refill toner cartridge, you will have to by toner and you can buy chip or if you have chip reseter, then reset the chip. It works fine. I use toner from supplier named "Uninet".
P.S. This cartridge is not easy for recycling

Jun 11, 2014 | Ricoh Aficio SP 5200DN - Printer - B/W -...

1 Answer

Toner empty error


In order for your printer to read the cartridge as full the chip on the toner will need to be replaced/reset. Sadly these cartridges are unable to physically check toner levels and rely upon counting pages/page coverage to estimate.

Dec 06, 2012 | Ricoh Aficio Sp 1000sf All-In-One Laser...

1 Answer

How to enter SP Mode for Ricoh Aficio sp 3200sf


"Menu" ? "#" ? "1" ? "9" ? "3" ? "4" ? "Menu"
The display shows "Tech Mode> Tech menu"
Press "OK" to enter Tech menu.

Jun 06, 2012 | Ricoh Aficio SP 3200SF Multifunction...

4 Answers

I need to reset the cartridge chip gx3000


how to reset the chip in ricoh gx3000colour printer

Jun 16, 2010 | Ricoh Aficio GX3050 GelSprinter

2 Answers

Installed new black toner but it still indicates it is empty and nothing will print!


Did you install a brand new cartridge? Or did you refill the old cartridge?
Ricoh has "smart chips" in the toner cartridges, and those tell the printer how much toner is used. If you refill the toner,the smart chip must BE REPLACED, the old chip will remain stuck at "empty".
Sucks, that Ricoh for you. That why that printer was $160 on Woot. LOL.
(Yea, I got suckered in too...)

Oct 13, 2009 | Ricoh SP C220N Aficio Laser Printer

1 Answer

After refilling the cartridge the toner low red light is still flashing. How to stop the flashing light?


Did you remove the plastic tab from the toner cartridge?
It would not be the first time I have been called to a faulty printer to find the cartridge had not been correctly installed.

You say in your post that you refilled the toner. Did you replace the whole cartridge or pour toner into the machine?
Every machine has different toner have you checked that it is the correct type?

Also some cartridges have a chip embedded that tells the machine that it has been replaced it is possible that this has failed either in the cartridge or within the machine.

Jul 03, 2009 | Ricoh Multifunctional SP 3200SF...

2 Answers

Nashuatec P7132N "Replace printer cartridge" after refill


Greetings
I want to see what types of inks used for the printer nashuatec P7132n

Thankful for your cooperation
Ashraf Dora
as_dora72@yahoo.com

May 08, 2009 | Office Equipment & Supplies

3 Answers

Toner Cart chip reset for Ricoh Aficeo sp c400dn


I believe you will need to purchase and install a reset chip. You can find them for the Ricoh C410 here at www.cfriends.com (that links straight tothe ricoh page - but if you need to search, type in "c410" into the search field on their site).

Jan 03, 2009 | Ricoh Aficio SP C410DN Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers

fares

Level 1 Expert

67 Answers

Michel

Level 2 Expert

93 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...