Question about Washing Machines

1 Answer

Replacing the agitator dogs in a Kenmore 80 series washer

I need to replace agitator dogs inan 80 series kenmore washer...how?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, Remove the cap on the agitator and then remove the inside cover. There is a 7/16" bolt under the inside cover. Remove the bolt and the agitator will lift out. Seperate the 2 pieces of the agitator and replace the dogs. You might have to use a flat blade screw drive and punch out the 4 tabs around the bolt hole in the agitator if this applies.
I hope this helps you. Please let me know if I can assist you further.

Vic

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What part # for agitator dogs?


Hi,

The parts number you seek is 80040 they should run about 5 bucks or so.

Good luck

Nov 20, 2015 | Kenmore Washing Machines

1 Answer

Kenmore 80 series washer agitates minimally but when you push down on agitator slightly it agitates more and is now having trouble starting to spin tub is it a belt issue?


Check out: http://www.appliance411.com/faq/agitator-dogs.shtml You can buy parts here: http://kenmore80serieswasher.com/whirlpool-kenmore-washer-agitator-cam-kit-285809/

Jun 25, 2011 | Kenmore Washing Machines

1 Answer

Kenmore Series 80 washer. Agitates too slow


check the dogs in the agitator take off the cap it should rachett if it turns free replace the dogs in the agitator

Jul 12, 2010 | Kenmore 24032\24036 Top Load Washer

2 Answers

80-series w/ broken top agitator


There is a video at www.appliancehelponline.com/servicemanual.html that will walk you thru the replacement of the agitator dogs, this is a common problem with this style washer.

Mar 28, 2010 | Kenmore Washing Machines

1 Answer

Kenmore series 80 washer: does not twist in the middle


Check the agitator by turning it back and forth. It should work like a ratchet (turns one way, locks the other way).If you're able to turn it in both directions, the agitator dogs are worn and need to be replaced.
Remove the agitator cap and the bolt that holds down the agitator. With the bolt out you can remove the top section of the agitator (auger) where you should see 4 small white or beige plastic gears (dogs). Replace those and it should be ok.
12763ce.jpeg
Part number is 80040

Let me know if you need more help.
Good luck!

Apr 01, 2009 | Kenmore Washing Machines

1 Answer

Agitator not working - how do you take it apart - Kenmore 80 Series washer


Pop the top off the agitator. There is a slot for a flat screwdriver on the top side.
Remove the 7/16 bolt.
Pull the agitator apart.
Replace the agitator dogs inside the top part.
Parts about $5.00.at any appliance parts store.

Mar 14, 2009 | Kenmore 23012 Top Load Washer

1 Answer

Kenmore 80 series washing machine agitator will not rotate


you need to replace the agitator dogs, very simple. Go to www.shop.washermd.com and download the tutorial, thanks

Mar 01, 2009 | Kenmore Washing Machines

1 Answer

I have a Kenmore Series 80 washer that agitates a little but is very weak. Spins Ok. Clothes don't clean very well. I need help.


Check the agitator by turning it back and forth. It should work like a ratchet (turns one way, locks the other way).If you're able to turn it in both directions, the agitator dogs are worn and need to be replaced. To do this remove the agitator cap and the bolt that holds down the agitator. With the bolt out you can remove the top section of the agitator (auger) where you should see 4 small white or beige plastic gears (dogs). Replace those and it should be ok.

Feb 23, 2009 | Kenmore 80754 Top Load Stacked Washer /...

1 Answer

Kenmore series 80 model 1102983120 older top agitator gone


if just the dogs are gone you can replace them wim any agitaor dog kit. I usually use whatever kit was cheaper when i order abd put just the dogs on. never had a problem yet.

Jan 26, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series


replace the dog set in the agaitator some have a 4 dog set part number 285770 and these are white some have a 2 dog set the part number is 358692 replacing these dogs will fixya

Apr 07, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...