Question about Fuji FinePix S2000hd Digital Camera

1 Answer

How to set manual bracketing on Finepixs2000

How do i reset or set the manual bracketing on my fuji foepixs2000 camera? everything is coming out yellow indoors and the bracketing is set totally to negativr side.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

If it is coming out yellow it is because you are not using a flash. Cameras see color at a kelvin temperature. Daylight is a about 5500 degrees kelvin. Indoors your camera sees about 2500 to 3500 degrees kelvin hence the yellow color. You can go into your camera menu and change how your white balance is set. The camera menu also allows you to set the EV for over and under exposure.

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset to factory settings , my fuji finepix s2 pro. the auto-focus function is not working. Camera can only be focused in the man mode. can you help?


Please try to download the manual in this website it can help you on how to reset the setting of your FUJI Fine Fix S2 PRO

http://downloads.fotosource.com/public/camera_manuals/Fuji/DigitalCameras/FinePixS2Pro.pdf


Thanks

May 09, 2011 | Fuji FinePix S2 Pro Digital Camera

1 Answer

My Fuji E500 shows a white screen when any photo taken outside


is it on shuter speed priority setting?
like manual over ride? if so put it back on auto setting

Oct 27, 2009 | Fuji FinePix E500 Digital Camera

1 Answer

Taking pictures in daylight Fuji Finepix F440


ok
u have to reset all settings
press power button for 10 seconds then it reset to factory defaults.

Apr 24, 2009 | Fuji FinePix F440 Digital Camera

1 Answer

Cannot adjust the quality settings on our Fuji S3 Pro


have you tried the reset to factory settings? in your user manual it tells you how to reset everything.

Apr 20, 2009 | Fuji FinePix S3 Pro Digital Camera

5 Answers

Fuji s5700 my flash is not popping up on auto


Don't blame the Fuji Designers for this fault - it was the Fuji Bean Counters that are at fault - the flash design is for TWO springs, the plastic casting has the holes for a second spring on the other side - which wasn't fitted so 100% overloaded the single spring mount.
Anyway if you are brave and handy you CAN fix this.
First remove the back of the camera - 3 screws in battery bay, 1 in the side above the memory card door, The two rear most on the bottom, two in the USB/video door, and the rear most on the left hand carry strap bracket.
Carefully prise the back rearward about 5 to 8 mm.
Now take a look at the two screw holes under the flash (when popped - or flopped out now that is broken) now go and bend a screwdriver of the type you used for the previous screws - you will need a 90 degree bend very close to the tip to fit in this gap and be able to turn the screws a few degrees at at time.
A little at a time lock the screwdriver into the screws and undo until the flash cover comes off.
You can then slide the shaft out of the flash to release the spring which will have the end that should fit into the broken bracket now sitting proud..
Make a suitable bracket like the one in the photo attached to slide over the broken plastic bracket.
make sure it fits really well the epoxy into position.
Getting the spring back in is a fiddly job - I found the best way was to fit the end of the spring into the new bracket, slide the shaft just into the spring - the lever the other end of the spring down into the back of the flash body and then slide the shaft all the way into place.
I did have to file down the little plastic "blade" inside the lid which presumably is designed to assist the the (now broken) bracket from breaking....
reverse the dis-assembly and now you should have a working flash bb61266_2.jpgbb61266_1.jpg

Jan 14, 2009 | Fuji FinePix S700 Digital Camera

1 Answer

Fuji s9500


there is (quite annoyingly) no way to set up a default

Oct 29, 2008 | Fuji FinePix S9500 Zoom Digital Camera

2 Answers

Fuji Film Fine Pix A500 Digital


nao consigo instalar a minha maquina no windows vista

Mar 31, 2008 | Fuji FinePix A500 Digital Camera

1 Answer

Camera will not turn on.


Check the manual for indications of error. Look for a reset to factory settings option. Switch off and remove batteries Take the memory card out and carefully cleane the contacts, now wrap a piece of paper atround the card in such a way that you have a frip on the paper an insert it and work it up and down thus polishing the chamber contacts. No joy? Contact Fuji Technical help team.

Jun 11, 2007 | Fuji FinePix A350 Digital Camera

1 Answer

Auto bracketing


I'm not familiar with your camera but I know on the cameras I've used in the past that you have to keep the button pressed until all shots have been taken. I believe that some cameras can be set up to take each bracketed exposure each time you press the shutter button but I haven't come across this as yet.

Sep 04, 2005 | Fuji FinePix S3100 Digital Camera

1 Answer

Finepix 1400 info needed


No battery back-up. There is a capacitor that stores a bit of charge. This allows you to replace the batteries and still keep the date/time setting. Leaving the camera without batteries for 10 minutes will completely drain the capacitors. This will cause the date/time to reset.

Sep 04, 2005 | Fuji FinePix 1400 Zoom Digital Camera

Not finding what you are looking for?
Fuji FinePix S2000hd Digital Camera Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...