When i go to camera or video recorder it said camera module not ready or with video it said camcoder module not ready this is a cell phone

try to replace the camera
or try clean the camera socket!!

hi

most camcoders do have a USB connectivity cable and using this connect the camcoder to the PC

once connected u will need to install the required drivers for the Camcoder to be recognised by the PC (this is a one time process)

then the firmware with the Camcoder will also provide u with some basic recording software u may install that too and then go to the starting of the tape (rewind on camcoder) and play and at that point in time click on the record button on the software installed on the PC

hope this helps
Cheers

hi,
try reset you phone using this code *#7780# reset to factory settings.
if not this a software problem try to update the firmware using pc suite.

Sorry to say- but it is trashed.. It would cost more to fix it than it would be to buy a new one.

what is solution for problem in 5310 - camera module not ready

Have you tried to reset the camera. There is a reset option in the manual that may help.

I am sorry, thats not my area of expertise try resubmitting the question to one of our other experts. We have quite a few experts that deal with cameras. Sorry I couldnt help you out.

my computer is unstalling all files and now my cd software to my sony dcr-hc20e digital video camera recorder was lost.pls help to find a free cd software to my sony dcr_hc20e digital video camera recorder

flash the phone and use again . code to flash is *7780# AND *7370#

you have to format phone memory of your P910 because some file is corruptet.Before you do this make a backup file on your pc to save your stuff.