Question about Fisher Paykel EcoSmart GWL15
Fisher paykel gwl15 overfills and beeps and will not advance cycle
Is it filling so it is flooding your floor? Could be that too many suds are in the pressure switch tube ( are you using "he" soap? ) or the pressure switch is not registering the water level. Note the lights illuminated when it beeps and call F/P.
Posted on Jul 21, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It sounds like you need to re programme the machine.
With the machine plugged into the wall and turned on and the headset turned off this is what you do.
Push and hold down the start button, while doing that you need to then push and hold down the power button.
Hold them down for about 5 seconds, during which time you may a series of up to 3 beeps.
Then release the buttons.
Turn the machine off and then on again followed by the start button. Allow the machine to then run the complete cycle.
This should correct your problem, if this doesn't then you may need to then look at replacing the computer panels.
Posted on Jun 14, 2009
thats it , remove those 2 screws and the top will flip back, the new "clothes guard"( neck ring), will snap right into place, be sure to rehook the spring to hte left front susension rod!
Posted on Mar 25, 2008
It sounds like you have a leaky inlet valve assembly. The part number is 421029P and is easy to replace. You can get one here:
Posted on Apr 20, 2009
Hi just read your posting.Now my manual says the problem with your machine is the motor controller.Please try advancing it to spin and see if it drains.When you say it is the 1st and 4th lights are they the 1st wash light and 4th wash light?Please reply so I can make 100% sure it is the motor controller as they are expensive.
Posted on Jun 11, 2010
Hi just read your posting.Now error code 37 is called pump block error.This means either your drain pump is jammed, or the drain pump is blocked or the pressure switch tube that regulates the water level is kinked or blocked or the motor controller is faulty.Does your machine always drain the water?Please reply and let me know if your machine is draining the water and we can track the fault down.Looking forward to your reply.
Posted on Sep 16, 2010
Tips for a great answer:
Dec 31, 2009 | Fisher Paykel EcoSmart GWL15
Sep 30, 2009 | Fisher Paykel EcoSmart GWL15
Jul 18, 2009 | Fisher Paykel EcoSmart GWL15
Apr 14, 2009 | Fisher and Paykel Fisher & Paykel Washer
Aug 26, 2008 | Fisher Paykel EcoSmart GWL15
Apr 30, 2015 | Fisher Paykel EcoSmart GWL15
325 people viewed this question
Usually answered in minutes!