Question about Craftsman Saws

3 Answers

Need motor for craftsman table saw model rm871

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to midlandhardware.com.For about $4.00 more than just price ofthe motor,you get the complete saw 15amp.motor with a laser guide!The table saw has a 3yr. warranty,3 extension wings,and a sturdy stand.Shipping to your door $24.00,$198.58 total.

Posted on Jan 20, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Http://www.ebay.com/itm/140614984387?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Posted on Oct 03, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have a RM871 that I bought for my Craftsman Tablesaw. I installed it but because Sears builds some of their tablesaw housings out of plastic, it cracked beyond repair when it was used on a job. I trashed the tablesaw and kept the motor. It barely got used! Let me know if you are interested in buying it. Thanks. Doug I have a RM871 that I bought for my Craftsman Tablesaw. I installed it but because Sears builds some of their tablesaw housings out of plastic, it cracked beyond repair when it was used on a job. I trashed the tablesaw and kept the motor. It barely got used! Let me know if you are interested in buying it. Thanks. Doug I have a RM871 that I bought for my Craftsman Tablesaw. I installed it but because Sears builds some of their tablesaw housings out of plastic, it cracked beyond repair when it was used on a job. I trashed the tablesaw and kept the motor. It barely got used! Let me know if you are interested in buying it. Thanks. Dougddougee@yahoo.com I have a RM871 that I bought for my Craftsman Tablesaw. I installed it but because Sears builds some of their tablesaw housings out of plastic, it cracked beyond repair when it was used on a job. I trashed the tablesaw and kept the motor. It barely got used! Let me know if you are interested in buying it. Thanks. Doug
I have a RM871 that I bought for my Craftsman Tablesaw. I installed it but because Sears builds some of their tablesaw housings out of plastic, it cracked beyond repair when it was used on a job. I trashed the tablesaw and kept the motor. It barely got used! Let me know if you are interested in buying it. Thanks. Doug

Posted on May 07, 2010

  • Doug Edmunds Oct 30, 2010

    The RM 871 motor is sold! Thanks!!

  • joesavoury47 Nov 23, 2010

    Does anyone know where I can get one of these RM871 motors besides at Sears because they want darn near the price of the whole saw just for the motor here in Canada.

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: I have a Craftsman table saw with a burned out

SOUNDS LIKE THE PROBLEM I HAD, BUT WAS JUST A SEIZED-UP BEARING. I WENT TO LOCAL ELECTRIC MOTOR REPAIR ($15.74) PARTS AND LABOR, THEY REPLACED THE BEARING, THERE ARE 2 BEARINGS ON IT, COST IS THE SAME FOR EACH. THE BEARING IS PRESSED ON, SO REPLACEABLE. HOPE THIS HELPED

Posted on Apr 15, 2009

  • 187 Answers

SOURCE: New or used motor for a Craftsman 10" table saw

You can try Sears but they can be a bit pricey. I use to send out motors for a factory I worked in to a rebuilder who would even do new windings. Check in your area for a rebuilder, As for the replacement being a Sears unit they may have a similar motor in stock. Good luck.

Posted on May 08, 2009

  • 1 Answer

SOURCE: New or used motor for a Craftsman 10" table saw

Sears no longer sells repair parts for this motor, only the whole motor as a replacement part, and it is $140.00, but you can buy replacement bearings from drillspot.com the bearing needed is an Enduro 6200 zz c3

Posted on Apr 17, 2010

  • 2 Answers

SOURCE: i need a table saw motor model rm871 where can i

I need the rear bearing for this motor, Where can I find one? Mine blew up. RM871 sears.

Posted on May 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I AM LOOKING FOR A MOTOR FOR A 10'' table saw modle#rm 871 1ph 120v amps13 rpm 5000 yr 1999/6


If you go to www.searspartsdirect.com and put in the model number of your saw you should be able to get one there. I don't believe that is the correct model number of your saw. Perhaps that was the model number of the motor. Does it look like this one?

http://www.joc-motor.com/product/234-universal-motors-joc-rm871-5994/

Oct 14, 2010 | Craftsman 10" Table Saw

3 Answers

I need a table saw motor model rm871 where can i go to get it?


Sears.com would be the only place that I know of, I also think that the motor number has changed,

Oct 02, 2009 | Saws

4 Answers

New or used motor for a Craftsman 10" table saw


Sears no longer sells repair parts for this motor, only the whole motor as a replacement part, and it is $140.00, but you can buy replacement bearings from drillspot.com the bearing needed is an Enduro 6200 zz c3

Apr 26, 2009 | Craftsman 10" Table Saw

1 Answer

New or used motor for a Craftsman 10" table saw


You can try Sears but they can be a bit pricey. I use to send out motors for a factory I worked in to a rebuilder who would even do new windings. Check in your area for a rebuilder, As for the replacement being a Sears unit they may have a similar motor in stock. Good luck.

Apr 16, 2009 | Craftsman 10" Table Saw

3 Answers

I have a Craftsman table saw with a burned out motor. The motor model number is RM871. Where can I find one for less that the $130.00 that Sears wants for the motor. That's the price of the saw.


SOUNDS LIKE THE PROBLEM I HAD, BUT WAS JUST A SEIZED-UP BEARING. I WENT TO LOCAL ELECTRIC MOTOR REPAIR ($15.74) PARTS AND LABOR, THEY REPLACED THE BEARING, THERE ARE 2 BEARINGS ON IT, COST IS THE SAME FOR EACH. THE BEARING IS PRESSED ON, SO REPLACEABLE. HOPE THIS HELPED

Mar 27, 2009 | Craftsman 10" Table Saw

Not finding what you are looking for?
Saws Logo

Related Topics:

2,512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Craftsman Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...