Bought a Pioneer SX580 receiver, everything lights up but can't get any sound

verify circuit breaker or fuses. check mute toggle if equipped with mute.

You have to hold src button until unit turns off. Then hold center control until a menu pops up. This menu has a demo setting. Turn that to off.

I'm having the same problem worked for a couple of days then just stopped playing music

I fixed it myself. Didn't realize that I loosened speaker cables on the wall panel when I moved the receiver and two were touching...

Check your speaker connections if you still have a problem check the radio settings. You can view the manual in their web-site.

If it's under warranty..get a new one.
It's an internal breakdown ...tech service only.

I have the same problem with my 49txi, and I called pioneer and a repair shop as well. Both told me that the 49txi has a known problem with over heating and that its boards unsolder themselves. I would have thought Pioneer would stand behind something this expensive, but that was the old Pioneer in the 80s, and the new Pioneer says we are on our own.

try to disconnect one of the speakers. (try every speaker) and one of them might be messing up the whole electrical sound cables.

Rick,

You can connect the inno via the home doc and the provided cable in the home kit. You may have to connect to an unused component on the receiveer (VCR comes to mind)...You move the VCR source on your receiver and you should be good to go.. I have a Pioneer Elite receiver but Pioneer makes no cable to connect those two ..no matter... I wanted to control the Inno from outside the receiver's controls..
Sam

my reciever is not functioning,i think, i need service manual or schematic diagram for troubleshooting please send this to my email ad [email protected]