<!-- from fixya rte -->Where do i get a replacment bagger - Mtd Arnold Corp RearMounted Bagger for MTD and YardMan Riding Mowers For 20

ive got a JD 180 .with a bagger on it if you have the factory bagger
1st bolt bracket to back right hand side of tractor holes should allready be there next assemble bagger top to tractor bracket , hang collection bags (two) from top of bracket (open top to access) then assemble diverter tube all together three sections , snap end (wide) into bagger (no bolts needed) then fold back safety discharge cover on deck all the way snap the inlet adaptor into hole left by this (perfect fit) and last stretch rubber bungee up to deck wheel strut and place clip thru small moon clip there, now you willl need to replace your deck blades with the High Lift type (mulch) avail still from JD (theres a extra wing on back of it) this makes more air to scoot grass up the chute if not your gonna have a lot of cloggs

Go Amazon.com On line enter mtd rear rider replacement bag

You will need to remove the back bagger mount to get to the battery at the back base of the mower deck and the bagger mount is in the way.

Start at the side shoot and then work you way back to the bagger mount. The battery should be under the black cover.

The battery is located in the back cover between the rear wheels.

I hope this will help.

Cracked head, replace engine. $119 at Harbor Freight.

there's are website that I know all heavy equipment repair issues servicing, loading, wiring, engine problems everything is covered here its a must try for those who aren't fully equipped with tools or knowledge

IS THIS GAS TANK MOUNTED ON THE SIDE OF THE MOTOR AND IF SO I MAY HAVE A GAS TANK FOR THIS UNIT

that could be wiring issue that the batter isn't able to take up the electricity supplied to it.. u know, the conductor between them..
if possible get a manual from
reliable-store to fix it urself

hello for heavy machinery
u will find a lot of wiring diagrams and circuit diagrams and stuff like this at few sites I know with service like
instant help any time

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

remove the cord assembly ,, either the cord is off track and needs to be rewound or it broke and needs replacement