Question about Sony Car Audio & Video

1 Answer

I cut the factory audio wiring harness and then re wired a new on

I cut my old wiring harness off of my 00 silverado then spliced a new plug from a 99 silverado on my radio works until my truck moves then it shuts off and when i hit the brakes and completely stop it comes back onn

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Please double check your connections.

Constant 12V+ Orange Switched 12V+ Yellow Ground Black Illumination Gray Dimmer Brown Antenna Right Window Trim Front Speakers 6 1/2" Doors Left Front (+) Tan Left Front (-) Gray Right Front (+) Light Green Right Front (-) Dark Green Rear Speakers 4" x 6" Side Pillar Left Rear (+) Brown Left Rear (-) Yellow Right Rear (+) Dark Blue Right Rear (-) Light Blue
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on Jul 03, 2009

  • blueextc3221
    blueextc3221 Jul 03, 2009

    Your Tach and Secondary Ignition wires are both white.
    Be sure you didnt connect that one especially.

    Thanks



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just got a Insignia cd/stereo/MP3 car radio and I really need an installation manual. Lots of wires, colors, don't know what they power. Where can I get the manual? It's going in my 01 Dodge Ram


Greg,

Do yourself a HUGE favor. Drop $8 on a radio wiring harness connector. You wire it to the aftermarket radio while sitting at your kitchen table. When done, yank the factory radio and simply PLUG IN the new radio directly into the truck's wiring harness. Done! No cutting of your truck's wires, splicing, taping or hanging upside-down making connections. Plus, when it's time to sell the truck - you can pull out your radio and dump the factory radio back in the truck in no time.

Stereo Wire Harness Dodge Ram Pickup 98 99 00 01 Car Radio Wiring...

You can find these at other stores locally too. Good luck!

Nov 30, 2015 | Dodge Cars & Trucks

1 Answer

No sound.


The first thing you need to do is doublechecking all the new wirings, it sounds like a contact.

Oct 24, 2008 | Kenwood KDC-MP338 Car CD Player

1 Answer

Kd-sx940 manual/instructions for wiring?My original radio was stolen from my 1998 Ford Ranger and they cut the wires,I bought this one but it has the wiring harness to a Subaru,I don't care if I have...


installation manual:
http://books.jvc.com/Download/18989249/FSNU3070-T632.pdf

And, for what's it's worth, the instruction manual:
http://resources.jvc.com/Resources/00/00/99/FSUN3070-632.pdf

May 22, 2011 | JVC KD-SX940 CD Player

1 Answer

How do i take the radio out of my 2000 silverado


When you remove the radio do not cut the wires. They sell a after market piece that plugs into the factory wiring harness and it in return has the wires cut at the end to splice into the radio. They also have a after market bracket that the after market radio fits into and slides back into the same place as the old one does with the same clip style. Your auto parts store should carry everything you need.

Jun 01, 2010 | Car Audio & Video

1 Answer

How to hook up the pioneer stereo to wire harness?


Not real clear on question, but you can buy a direct fit wire harness and the wires are color coded so you don't have to cut and splice your wires on your factory harness.The harness hooks to your factory plug and you wire it to your pioneer stereo wires. Harness is about 7.99 up at most stores.

Nov 03, 2009 | Boss RT-6CK Car Component System

1 Answer

Wiring in a new car deck


The easiest and most efficient way to hook up your old radio harness to a new head is to use a harness adapter that is made for your vehicle.
If you have not cut off the old plug that went into the old radio then it would be a simple matter of plugging the adapter harness into the old plug and color matching the wires from the adapter to the new head wires, which will be the same colors.
If you go on line to - Installer.com you probably will find the correct adapter for your vehicle. There are other on-line stores that deal with adapters, as well.
If the old plug was cut, it may be possible to splice the plug back to the original wires, then it's a matter of plugging the adapter plug into it.
Hope this helps...

Jul 13, 2009 | JVC KD-S5050 CD Player

1 Answer

How to install pioneer deh 2050 in my car


Hello b-mh,

Here's a link to the Install Doctor page for Mitsubishi. It's actually best to use an aftermarket wiring harness to avoid the need to cut or splice the factory vehicle wiring. Such harnesses are widely available and very inexpensive. The Scosche MI02B shown here seems to be the correct one for your vehicle. Look at the plug to see if it matches the one in your car.

Hope this helps.

May 17, 2009 | Pioneer Car Audio & Video

1 Answer

Factory radio missing, wires were cut


go to any good auto parts store and ask them. for a universal pigtail wiring harness. and if they cant help u go to a junkyard and buy that part of the harness and splice it in

Mar 04, 2009 | 1999 Daewoo Nubira

1 Answer

Wiring problems


Yes, but if you don't have a really good diagram for both, you will need to identify each function by trial & error, then remove wires in harness and put them in the right places in the harness plug Use original plug from old seat on new seat.Don't change anything in body harness.

Jan 31, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Hi, I am installing a new head unit into my dads 98' Buick LeSabre and the factory harness has been cut and I'm not sure of the color code and not sure how to run the extras thru the new head unit and how...


Metra makes wire harnesses for your problem. If your wire harness is, 70-5555 the part that goes into the OEM radio will be 71-5555
Try www.metraonline.com and put in the car info. The harness will come with wire codes for splicing the new plug.

Dec 17, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4844 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Philip Rowney
Philip Rowney

Level 2 Expert

94 Answers

Are you a Sony Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...