Question about Panasonic PT-50LC13 50" Rear Projection HDTV

2 Answers

PT-50LC13 won't turn on. Will blink green and make a chirp noise

After awhile of blinking green and making a chirp noise it begins to blink red for a long time. I have tried to unplug and leave off for 30 minutes and have had the same result.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

It is the balister not the lamp. Very common problem that Panasonic will not address. Costs over $600 to repair. file a complaint with consumer affairs please.

http://www.consumeraffairs.com/php/a_report.php

Posted on Sep 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got the repair kit LSUC0022 Repair Kit for the Ballast on my Panasonic PT-50LC13 Television. Unfortunately it did not come with a schematic showing what components to replace. Does anyone have the schematic?

Posted on Jan 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic pt-50lc13 won't show picture. Blinks green when turned on can hear lamp clicking then goes off to red blinking for a few miniutes then shuts down to just red . Can u help me out please?


sound like your lamp is bad ...Panasonic TY-LA1000 Lamp Replacement...Ballast Repair Kit for Panasonic PT-50LC13 some time the ballast go bad as well to hear bouth part number one lamp and 2 ballast I hope this help you..

Nov 19, 2013 | Televison & Video

1 Answer

TV will not turn on-- clicking noise in the back


The power pack the the power cord goes into has gone bad and needs replaced, see manufacturer for service or parts.

Nov 15, 2007 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Hello. My Panasonic PT-50LC13 is not turn on. First flashing green light for one minute on the power button then starts to blink red and at the same time it starts blinking red LED lights every five...


Check ur tv fan,if ur cooling fan are runnig,before all these LED lights are flashing.If not that ur tv problems.All these LED lights are flashing the tv making alots of clinking noises too like it trying turn itself on?Yes,than the tv board that called the Ballast board it is dead too,must be replace also.This tv Ballast board only job are to help to ignite the tv projection lamp only and keeping it on and running.

Aug 29, 2011 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Panason PT-50LC13 TV won't come on, light blinks green then red


Ballast failure is more that likley the problem. Is the lamp light blinking,...once every 5 seconds? Discontinued part and can only be purchased used or rebuilt. Rebuilt units are available, check Ebay. Have a service type person confirm problem before throwing good money after bad!

Jan 03, 2010 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

NEW BULB INSTALLED FOR PANASONIC PT-50LC13 TV STILL NO LIGHT


close lamp door set will not work with door open. if not that listen for arcing sound in back if  don't hear that bad ballest 

Jun 09, 2009 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

My Panasonic PT- 50LC13 doesn't turn on


Your service manual on page 82 steps you through decoding the blinking
1) there are two lights on the front near the reciever of the remote signals (Temp indicator and Lamp Indicator)
2) If the Temp indicator is on then they recommend you contact a service center
3) If the Lamp indicator is on and the power light stays on (no blinking) then you need to replace the lamp. Otherwise it says to contact the service center.
4) Counting blinks with the lamp indicator (1 every 5sec - lamp will not light or is abnormal, 2 every 5sec - lamp voltage is abnormal, 3 every 5sec - lamp temp is too high, 4 every 5sec - other error)

Apr 26, 2008 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

PT-60LC13


there are fans inside tv need to make sure they are clean and free of dust

Nov 27, 2007 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Flashing green and red


Send me an e-mail and I can send you a Panasonic Code List. (satellitecanada@gmail.com)

Nov 25, 2007 | Panasonic PT-50LC13 50" Rear Projection...

Not finding what you are looking for?
Panasonic PT-50LC13 50" Rear Projection HDTV Logo

771 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...