Question about Roper REX4634KQ Electric Dryer

1 Answer

I don't have the manual need to know the sequence left to right of the four wires of plug wire connect

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

If you are talking about how to connect the power cord to the dryer. the following link explains:

http://www.fixya.com/support/r793520-3_prong_4_prong_power_cord_conversion

This is US Standard wiring code. Just follow the wire color codes and remember NOT to ground the Neutral (WHITE) wire in a four wire configuration. If you are in another country, please let me know. If this isn't the wiring you are talking about, also let me know. I hope this helps you.

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can a person see the wire plug for 2000 sportster speedometer to put the wires in the right sequence


Since you have been waiting this long for an answer it does not appear anybody can help. Either go to the shop foreman at a Harley service department and ask for a printout of the connector and wires or buy an electrical service manual.

May 31, 2014 | Harley Davidson Motorcycles

1 Answer

Need to know how to connect power cord with four wires...


this should be a 30 amp 4 wire plug for a dryer white to center take off the ground strap from the center white post that bolts to the green ground screw u want to isolate the ground green wire goes to green ground screw, black and red goes to outside screws one left one right

Apr 22, 2013 | Dryers

2 Answers

Where would I find the wiring diagram for a Samsung Security Camera SOC-a101? It is a 6 prong plug and I need to connect a PS2 connector to it.


I have a Samsung soc-a101 digital color security camera, wires corroded off male plug to camera what is the wiring sequence to the plug? wires are: red 12 volt looking at pin's front side not back of plug, from plastic tab pointed up red is on right top terminal, audio is top left terminal which I assume is white wire, then I have a clear plastic covered wire and the bare stranded wire. what terminals go to these wires I assume the bare wire goes to the metal ring of the plug as it had a wire soldered to it just don't know which! this leaves the bottom pins on the left and right set of two and the two bottom pins! Can you help? remember I am looking at the front not back where the wires are soldered. Thanks.

Dec 07, 2012 | Samsung Soc-a101 Hi-res Outdoor Bullet...

1 Answer

I have not received a diagram of my stylus wiring. none of the sites that was recommended have helped. do you know the purpose of each color of the four wires?


One is earth for the right, one is earth for the left, one is right channel and the other is left.
You don't need to know the colours to find the left and right channels. Just connect the turntable to the amp switch on. Then with your finger touch each wire one at a time. One will buzz on the left the other will buzz on the right. You might even get a slight buzz from the two earths.
The cartridge might have the left or right channels marked so you can connect them, but if it doesn't just connect the left to one side and the right to the other, then do the same with the earths. try it out, if the channels are the wrong way round change them, if the sound doesn't sound right change them again and again till it sounds right. You won't damage the amp or cartridge from doing this. Unless it's some kind of static effected cartridge!

Jul 30, 2011 | Audio Players & Recorders

3 Answers

Hi, I took my headphones (DT 770) to have a new jack put on after the old one was damaged and i (stupidly) cut it off. They are unsure of the wiring configuration and the technical info regarding the...


Hey benblay7. Cutting the wire was not stupid at all.

Two of the wires are ground and are tied together and soldered to the ground terminal. These should be the same color, usually a shiny copper color. The ground is negative. The tip of the plug should be wired to the left side and the center is, of course, the right.

Check this out: explainthatstuff.com/howtorepairheadphones.html

Good luck from Detroit, MI.

Apr 29, 2011 | Beyerdynamic DT 770 PRO Professional...

1 Answer

HI I have a Beko Electric oven (model SCC 2632). It has a combined oven and grill element which i redently had to replace. Fitted it no probelm, but when it came to attaching the coloured wiring spades...


Have a beko scc 2632 cooker. Need to know the colours of wires fom left to right of grill/oven element as it is different than the old element?

Jan 29, 2011 | Ovens

1 Answer

I need a wiring diagram for a 2001 ford f150 trailer hitch plug in. i got a new heavy duty trailer connector and i need to know the color code of the wires


Hey Bryan

I've got them for Six and Four wire plugs

Six wire plugs:

Horse, stock or utility trailers:
White = Ground - GD
Yellow = Left turn/Brake -LT
Green = Right turn Brake -RT
Brown = Tail and clearance lights - TM
Red or Black (not both) = Battery, aux power - A
Blue = Electric Brakes - S

Recreational Vehicle: (color, use, plug mark)
White = Ground - GD
Yellow = Not used -
Brown = Right turn Brake - RT
Green = Tail and clearance lights -TM
Black = Battery, aux power - A
Red = Left turn/Brake - LT
Blue = Electric Brakes - S


Four wire plugs:
White = Ground
Yellow = Left turn/Brake
Green = Right turn Brake
Brown = Tail and clearance lights


Ground should be 10ga.
Others 14 ga

Best regards
Mike

May 02, 2009 | 2001 Ford F150 Styleside SuperCrew

3 Answers

Wiring diagram for accessory plug needed.


I am looking for the same wiring diagram. The headset Moto sells is a single earpiece with microphone, so how does that end up being a stereo connection Neto? Just curious how, or is there also a full headset with microphone? ( I dont' know, just asking)

Would this be a 4 ring TRS connector? Sleeve = ground, then left, right, and the tip as the microphone??

Jan 18, 2009 | Motorola Talkabout T5420 (14 Channels)...

2 Answers

How do you connect a pioneer d2 navigation system to a 2006 ford expedition entertainment system


You need to identify the four wires that carry the DVD audio in the factory plug, and re-wire them to RCA plugs that can be used with the Auxiliary input RCA jacks on your Pioneer unit. The four wires should be: Left (+) light green Left (-) white Right (+) red Right (-) black The easiest way is to purchase some inexpensive RCA cables (or better yet, speaker wire with RCA ends). Cut the cables and wire the center pin conductor wires to the (+) audio wires in the stock plugs, and connect the outer shield conductors to the (-) wires. Then connect the RCA plugs to your head unit's auxiliary input jacks.

Aug 08, 2007 | Pioneer AVIC-D2 DVD Nav/6.5"...

Not finding what you are looking for?
Roper REX4634KQ Electric Dryer Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roper Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

Are you a Roper Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...