Question about Televison & Video

2 Answers

VS 5001R sounds like its gonna turn on but doesnt

I have a VS 5001R Mitsubishi TV that wont turn on. It sounds like its going to turn on when i hit the power button but then nothing happens. I tried holding the 2 input buttons for 5seconds... no code. There isnt a menu button. any advice??

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

This tv takes time for the picture to fade in so if you hold the power button to long it turns on but before the picture fades in it turns off so just tap the button and wait for the picture to fade in.

Posted on Aug 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 668 Answers

This chassis model line had issues with the vertical output IC shorting causing shut down.
It also had issues with intermittent solder connections in the Horizontal Circuit. I would not try to fix it your self unless you are very familiar with Projection circuitry and electronics background.
Hope this helps,
Skyassoc

Posted on Jul 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

MITSUBISHI TV VS-60607


HI there,

Check for any bad solder on the mainboard of the TV, and also check for any burn fuse on the powersupply area... BAd solder was very common problem on Mitsubishi TV..

micro

Jun 07, 2008 | Mitsubishi VS-60607 TV

2 Answers

Mitsubishi VS-50603 Wont Turn on


The power supply will need to be changed. The capacitors inside the power supply are not sending the correct amount of power to tv and will need to be changed.

May 13, 2009 | Mitsubishi VS-50603 50" Rear Projection...

1 Answer

Mitsubishi vs-50609 wont stay powered on


Hello nicolastran,

I gave this advice to someone with this same problem so here it is again:

It sounds like your shutdown circuit is being activated. This is due to excess current being drawn. This usually happens in the High Voltage section of the TV or one of the deflection stages. Due to the nature of this problem I would suggest that you take it to a local TV repair shop or have a TV repair person come out and take a look at the issue. The HV section is dangerous and should be dealt with by a qualified TV repair technician.

Thank you,
I hope this helps

Shuttle83

Jun 24, 2008 | Mitsubishi VS-50609 50" Rear Projection...

2 Answers

Mitsubshi VS-70601 TvGuide+


I have the same problem have ypu figured it out yet?

May 19, 2008 | Mitsubishi VS-70601 70" Rear Projection...

1 Answer

Mitsubishi tv


Could be a power supply problem - sounds like the feeder cap was failing slowly until the heat stress on the regulator finally gave out.. You'll want to check the following: Strm6515A (That's the regulator, R9a23 1.2 ohm, C9a15 220uf/35v , R9a0 1k all in that feed circuit for the regulator.
Bill

Jan 29, 2008 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

Mitsubishi VS 5001r 1989 won't turn on.


Check the horizontal output and the low voltage regulators . Also push the input and menu buttons on the set in together hold for 5 seconds and see if the light blinks out a code. If it does let me know what the code is.

Jan 24, 2008 | Televison & Video

1 Answer

Mitsubishi VS-50501 - Black Screen


Is the power light staying on? If so press imput and menu together for 5 seconds to see if the set will blink a 2 digit repeating code. If that doesnt work. Check for CRT coolant leaks on the boards. This seems to happen alot as do faulty capacitors. Coolant leaks will be located on the chassis directly under the tubes they can cause corrosion and prevent your set from starting especially in the VS models.

Dec 30, 2007 | Mitsubishi VS-50501 50" Rear Projection...

3 Answers

Mitsubishi VS-50800 on/off problem


It sounds like, and I'm only making an educated guess here, but I'm thinking your television is broken and you should probably get a new one if you want to continue watching television.

Oct 21, 2007 | Mitsubishi VS-50800 50" Rear Projection...

1 Answer

Black screen and have sound


find problem here in threads,

Nov 15, 2006 | Mitsubishi VS-4543 45" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...