Question about Computers & Internet

1 Answer

MY WEBCAM NOT WORK IF IUSE SKYPEE - Computers & Internet

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

See section A. Skype in the info below to setup the Audio & Video.

Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

After downloading and installing Skype set it up as follows:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

http://ca.messenger.yahoo.com/download/

After downloading and installing Yahoo Messenger set it up as follows:
1. Click on Messenger at the top left and then go down to Preferences and then the Preference Window will come up.
2. Next click on Calling and Devices. In the Calling & Devices on the right and set the Microphone and Speakers to the computer Audio Card or sound device installed in the computer.
3. Just below that, go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
4. Then after completing the Audio Setup, on left panel, go to down and click on Super Webcam and click on Start Super Webcam Mode Automatically.
5. Then click APPLY and then OK.
6. Next click on MESSENGER and then click on MY WEBCAM and you camera should BRODCSAST and you will see your picture.

C. Windows Live Messenger:

http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger

http://dashboard.aim.com/aim

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Aug 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot get skype camera to come on on an existing account


I can't get my webcam to work

1. Check that your webcam is switched on and plugged into your computer

2. A webcam can only be used by one application at a time, so make sure you don't have any other applications open that are accessing the webcam, e.g. other instant messaging applications or even some websites.

3. Problems with video are often caused by driver issues. A driver is the program you install with the webcam which makes the webcam work with your computer (some webcams use preinstalled drivers so you may not have had to install one). Make sure you have the latest driver installed. You can download and install the most recent drivers from the webcam manufacturer's website.

To test your webcam go to the Skype menu > Preferences > Video and tick the box Enable Skype Video. When Skype is able to use your webcam, you will see a video preview of yourself.

http://www.skype.com/intl/en-us/support/user-guides/skype-for-mac/call-quality/poor-quality-video/webcam-not-working/


Aug 24, 2011 | Skype IM

1 Answer

I have skype and my brother has a logitech quickcam, can he call me on my skype? are they compatitable


You both need to download Skype and configure your webcams to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

When he tries to install his webcam he will be notified if its not compatible - this usually means updating to the latest software

http://www.logitech.com/en-us/support-downloads/downloads/webcams

Aug 03, 2010 | Logitech Quickcam Chat Webcam

1 Answer

My webcam is installed and worked on Skype once. Now it turns on but does not transmit any image. what should i do?


Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

May 01, 2010 | Logitech QuickCam Communicate Deluxe...

1 Answer

Does skype work with Microsoft LifeCam VX-6000? I've got the current driver using windows 7.


Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Apr 29, 2010 | Microsoft LifeCam VX-6000 Webcam

1 Answer

I Have a creative web cam Pro which was working for qiet some time and suddenly stopped working on skype


Recheck your settings
Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Apr 25, 2010 | Creative Labs WebCam Live!

1 Answer

My logitech webcam wont work with skype. it works


You can try to configure it.
But first I would recommend you to download the latest version of skype.
Link is :(www.skype.com/download/)
While configuring be sure to use the following setting:
1.Start skype.
2.In the navigation pane of the Skype Options window, click Video Settings.
3.Adjust quality of picture in 'Settings
4.Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
If you need further help you can log onto:
(http://support.skype.com)

ok
Good Luck

Jan 02, 2010 | Logitech Quickcam Chat Webcam

2 Answers

Hello,Skype Webcam unknown Error


i have a same problem. my cam work well but in skype call it dose not work! in video configuration i see the cam but in video call write uknown error what can i do?

Nov 01, 2009 | Microsoft LifeCam NX-3000 Personal Web...

2 Answers

Webcam is not displaying video


Check your webcam here by clicking allow in top window and see if webcam broadcasts in left hand panel
http://www.testmycam.com/
If working - proceed to Skype set up
If its not working -
Uninstall webcam software
Disconnect webcam
Restart computer
Download software from here
http://support.creative.com/Products/Products.aspx?catid=218
Test again as above
When working proceed

Start Skype.
On the Tools menu, click Options.
In the navigation pane of the Skype Options window, click Audio Settings.
Select your webcam as the default microphone. (If it has a built-in mic)
In the navigation pane of the Skype Options window, click Video Settings.
Select your webcam as the default.
Click Save.
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the Skype Web site:
http://support.skype.com (http://support.skype.com)

Oct 15, 2009 | Creative Labs WebCam Live!

3 Answers

My Veo web cam will not work with skype. why not? can i download a patch or something?


Have you configured your webcam to skype ?
If you have problems when you use your webcam in Skype, you may have to configure the audio and video setting in Skype. To do this, follow these steps:
  1. Start Skype.
  2. On the Tools menu, click Options.
  3. In the navigation pane of the Skype Options window, click Audio Settings.
  4. Select your mic as the default microphone.
  5. In the navigation pane of the Skype Options window, click Video Settings.
  6. Select your webcam as the default Webcam
  7. Click Save.
  8. Test webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site: http://support.skype.com (http://support.skype.com)

Aug 29, 2009 | Veo Stingray

1 Answer

Reseting my linksys


You may have to close the CIT200 program by right-clicking it's icon in the system tray .. then log into the 2nd Skype account and restart the CIT200 program.
*shrug* This might do the trick for your situation.

~Myrddin
.end.trans.

Feb 11, 2008 | Linksys CIT200 IP Wireless Phone

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...